Char-Broil Silver Smoker 12201560 Product Manual page 14

13
NOTE: Smoker chamber door not pictured for clarity.
First, attach shelf slats to the two outer holes in shelf brackets using
two #10-24x1" screws and #10-24 flange nuts per slat. DO NOT
FULLY TIGHTEN SCREWS.
Second, fully tighten hex-head bolts on shelf brackets (installed in
previous step).
Third, attach remaining shelf slat to brackets with two #10-24x1"
screws and #10-24 flange nuts. FULLY TIGHTEN ALL SHELF
SLAT SCREWS.
2nd
Tighten bracket bolts.
14
If you have purchased the optional 3" Temperature Gauge,
part number 40003010, remove the attached nut, insert
gauge stem into large hole in cooking chamber door and
attach nut to gauge on inside of door. DO NOT
OVERTIGHTEN NUT. Make sure text and graphics are
aligned for easy viewing.
If you do not have a temperature gauge, install the chrome
hole plug (provided) into temperature gauge hole in cooking
chamber door.
If you would like to purchase the optional 3" Temperature
Gauge, part number 40003010, call 1-800-232-3398.
14
3rd 1st
Attach inner slat. Attach two outer
Fully tighten all shelf slats. Do not
slat screws. tighten.
Hole plug