Char-Broil Silver Smoker 12201560 Product Manual page 11

7
Attach Firebox Top Assembly to Firebox Bottom Assembly using eight 1/4-20x3/4" hex-head
bolts as shown below.
Firebox Top Assembly
Firebox Bottom Assembly
8
NOTE: Smoker chamber and firebox doors not pictured for clarity.
First, locate the cover plate in the hardware box. At the bottom right end of the
TM
firebox there is an opening for the Diamond Fire ignitor accessory. Install the
cover plate over the opening using two #8-32x1/2" screws and #8-32 lock nuts.
Second, align the hole pattern on the firebox with the pattern on the
smoker chamber. The firebox should be slightly offset from the smoker
Firebox
chamber. Attach using six 1/4-20x3/4" hex-head bolts and flat washer
inside firebox and 1/4-20 flange nuts inside smoker chamber.
Firebox
Cover Plate
11