Char-Broil Silver Smoker 12201560 Product Manual page 9

3
Lay the leg assembly on its side with legs braces pointing upward. Insert the wood rack hooks into leg holes and swing rack
upward, parallel to leg braces.
4
With the aid of a helper, place leg holes of remaining leg assembly over wood rack hooks and rotate leg assembly until it
meets the leg braces. Make sure both short legs are at one end of the rack and both long legs at the other end. Attach to leg
braces using #10-24x1-3/4" screws and #10-24 flange nuts. DO NOT FULLY TIGHTEN screws until Step 6 is complete.
Short leg
Short leg
Wood rack
Long leg
Long leg
Do not fully tighten screws
until Step 6 is complete.
9