Using your telephone in GAP mode
Using your telephone (continued)
Flashing (Timed break):
Flashing can be necessary to activate other operations, for example when transferring
a call to another extension.
Sending DTMF signals:
DTMF signals may be necessary, for example, to access online voice services
or to consult an answering machine.
Selecting your telephone system
Programming system entries:
Your 4074 G telephone can be programmed to operate with 5 different DECT systems
(Alcatel or GAP). Entry 1 is generally assigned to your main Alcatel Office system.
For the assignment of the other entries, it is recommended that the most frequently
used systems be assigned to the lower numbers (entries 2 to 5).
Selecting automatic/manual:
If the systems are installed on remote sites (far apart and with no overlap zone),
the system is selected automatically, when the telephone is switched on. In the case
of fixed systems with overlapping geographical zones, system selection can be
modified by the user, as follows:
"ENTER 1-5 : Y"
is displayed
enter the new
"Y" is the new value
system number
"2 : SYSTEM TYPE"
is displayed
all digits subsequently dialled are sent in DTMF,
"1 : SYSTEM NUMBER"
is displayed
"1 : SYSTEM NUMBER"
is displayed
"3 : SYS TO LOCK ?"
is displayed
55
including (*) and (#).
"ENTER 1-5 : X"
is displayed
"X" is a value between
0 and 5, indicating the
current system number