Using the commercial battery holder (continued)
Do not install different types of cell, or cells with different charge levels,
in the holder.
Only batteries recommended by Alcatel should be used. Batteries should only be
charged in the chargers supplied by Alcatel. If these instructions are not strictly
observed, Alcatel declines all responsibility.
Do not use dry batteries. Overcharging batteries cannot increase the nominal
charge level and may seriously damage your telephone or charger.
Carrying cases
Several types of carrying case are available for the 4074 range of telephones.
These cases provide effective protection against impact (being dropped), dust and liquids.
Carrying cases are strongly recommended in severe environments. For the characteristics
of each model, contact your installation technician.
Remove the belt clip from your telephone to facilitate case insertion and removal.
To remove the belt clip from telephones 4074 B, GB, GB Ex and GC, unscrew the clip
mounting screw and store the belt clip for future use. On telephones 4074 H, GH and
GI, firstly release the belt clip using the tip of a ball-point pen, while pushing back the
top tab behind the clip. Then release the clip by sliding it downwards on the telephone.
Accessories
17