Default Lock - Alcatel 4074 B User Manual

Using your telephone in GAP mode
Selecting your telephone system (continued)
"SYS Y OK ?"
is displayed
radio field icon
reappears
the green ligh
goes out

DEFAULT LOCK

This function is only available on some telephone versions. This function locks
terminal operation on the programmed system number, and stores the locking
in memory (even following a telephone off/on)..
"ENTER 0-5 : X"
is displayed
"X" between 0 and 5 indicates
the number of the current locked
system. 0 indicates no locking
"1 : SYSTEM NUMBER"
is displayed
To cancel the lock and restore automatic system selection:
enter 0 as value for the "Default lock" parameter
When "Default lock" is selected, all other systems programmed in the telephone
are ignored.
If the selected system number is not valid for default lock, the telephone will
be unable to contact the radio relay.
the radio field icon temporarily disappears
and the green light flashes on the telephone
"1 : SYSTEM NUMBER"
is displayed
green light remains out
"1 : SYSTEM NUMBER"
is displayed
number of system
to programme for
locking
to return to
idle status
56
a few
seconds
your telephone is operational
on the selected system
"4 : DEFAULT LOCK"
is displayed
"ENTER 0-5 : Y"
is displayed
"Y" is the new value
to switch the telephone off / on
and apply the new programming