Download Print this page

Pro-Ject Audio Systems Speed Box MK II Instructions For Use page 3

Switching on and off

Pressing the power switch of Your Pro-Ject Turntable alternately starts or stops the motor.

Technical specifications PRO-JECT SPEED BOX MK II

Speed change

Power output

Outboard power supply

Dimensions (H x W x D)

Weight without power supply

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,

please contact your dealer for further advice. Only when the problem cannot be resolved there should the

unit be sent to the responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons release the

manufacturer from any liability over and above the lawful rights of the customer.

PRO-JECT is a Registered Trademark of H. Lichtenegger.

This guide was produced by: ATR-Audio Trade GmbH

33,33/45,11 r.p.m. ** or 78 r.p.m. (with optional 78 r.p.m. pulley only)

16V/190mA AC max. (power consumption 3W max.)

16V/500mA AC, suitable for your country's mains supply

38 x 105 x 120mm

540g

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.