Advertisement
Quick Links
Advertisement
Related Manuals for Pro-Ject Audio Systems Debut III
Summary of Contents for Pro-Ject Audio Systems Debut III
- Page 1 INSTRUCTIONS FOR USE Pro-Ject Debut III...
- Page 2 © Audio Trade GmbH · Pro-Ject Debut III / Ortofon OM 5E · Revision 15.06.11/15.07.11...
- Page 3 Fit the platter (5) and felt mat over the spindle of the hub (4). © Audio Trade GmbH · Pro-Ject Debut III / Ortofon OM 5E · Revision 15.06.11/15.07.11...
- Page 4 If your amplifier does not have an input suitable for phono cartridges you will require a separate phono amplifier stage for MM or MC cartridges such as the Pro-Ject Phono Box or the Pro-Ject Tube Box which is then connected between the record player and a free line level input of the amplifier.
-
Page 5: Maintenance And Cleaning
(3) over the larger diameter part of the motor pulley (2). Refit the platter. To revert to 33,33 r.p.m. repeat the proceedings using the smaller step on the pulley. When the Pro-Ject Speed Box ore the Speed Box SE are used speed change between 33 and 45 r.p.m. is electronic. There is no need to move the belt manually. - Page 6 (16) platter (5), cartridge and belt (3). Fit the cartridge protection cap. Insert the transport screws for the motor (1) and the transport lock for the tonearm (18) prior to carefully packaging the record player. © Audio Trade GmbH · Pro-Ject Debut III / Ortofon OM 5E · Revision 15.06.11/15.07.11...
- Page 7 Accessories 2 motor transport screws (marked red) Tomearm transport look Tonearm counterweight Power supply Platter © Audio Trade GmbH · Pro-Ject Debut III / Ortofon OM 5E · Revision 15.06.11/15.07.11...