Hard Drive - HP G62 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector. The
hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also
available in the Hard Drive Hardware Kit.
Description
750 GB, 5400 rpm
640 GB, 5400 rpm
500 GB, 5400 rpm (for models 1.1 only)
500 GB, 7200 rpm
0 GB, 5400 rpm (for models 1.1 only)
320 GB, 7200 rpm
0 GB, 5400 rpm (for models 1.1 only)
250 GB, 7200 rpm
160 GB, 7200 rpm
Hard drive hardware kit (not illustrated, includes connector, bracket, and screws)
Before removing the hard drive:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the hard drive cover to the
computer.
42 Chapter 4 Removal and replacement procedures
Battery on page 41).
Spare part number
619686–001
603785–001
634638-001
610583-001
622643-001
603783-001
622641-001
635225-001
615076-001
605919-001