Modem Module - HP G62 Maintenance And Service Manual

Modem module

Description
56K V.92 data/fax modem (select models only) (for model 1.0 only)
Before removing the modem module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the modem module:
1. Turn the computer upright with the front toward you.
2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the modem module to the system
board.
3. Lift up on the front of the modem module (2) to disconnect it from the system board.
Battery on page 41).
Hard drive on page 42)
Optical drive on page
Keyboard on page 53)
Top cover on page 56)
45)
Component replacement procedures
Spare part number
510100-001
63