Table of Contents
Advertisement
Understanding jam numbers and locations
When a jam occurs, a message indicating the jam location appears. The following illustration and table list the paper
jams that can occur and the location of each jam. Open doors and covers, and remove trays to access jam locations.
Jam number Jam location
200
1
2
201
202
3
4
230
5
235
6
242 and 243
7
250
290
8
Standard 250-sheet tray and manual feeder
(Tray 1)
Under the fuser
In the fuser
In the duplex
In the duplex
Note: This jam number indicates that the
paper being used for a duplex print job is not
supported.
550-sheet tray
Note: The 550-sheet tray is a part of the
optional 650-sheet duo drawer.
In the multipurpose feeder
ADF
Instructions
1
Open the front door. Inspect the area behind
the front door, and then remove any jams.
2
Open the fuser cover. Inspect the area under
the cover, and then remove any jams.
3
Close the front door.
4
Pull Tray 1 out. Inspect the tray area, and then
remove any jams.
5
Verify that the paper is loaded correctly.
6
Reinsert Tray 1.
1
Pull the 550-sheet tray out, and then remove
any jams.
2
Reinsert the tray.
1
Press the release latch to the left to release the
multipurpose feeder.
2
Inspect the multipurpose feeder, and then
remove any jams.
3
Close the multipurpose feeder.
Note: You may need to open the 650-sheet duo
tray to remove jammed pages behind the
multipurpose feeder.
Open the ADF cover, and then remove the jam.
Clearing jams
109
Advertisement
Table of Contents
