Page 2
We would like to know your opinion on this publication. Please send us a copy of this page if you have any constructive criticism. We would like to thank you in advance for your comments. With kind regards, Your opinion: Order No. (BA71R-3): 01750218568B...
Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Use only RF shielded cable to connect this monitor to a computer device. BA71R-3 Operating Manual...
Keep food particles and fingerprints away from the display area. Storage Do not store the monitor in temperatures higher than 60 °C (140 °F) or humidity higher than 85%. Store in a dark place, keep away from sunlight and ultra violet (UV) radiation. BA71R-3 Operating Manual...
Technical Specification Specification Overall Dimension (H x W x D) Monitor Only 192 x 251.2 x 37 mm (Shipping weight 1.7 kgs) With T-Joint 234.9 x 251.2 x 69 mm (Shipping weight 2.2 kgs) BA71R-3 Operating Manual...
Page 11
With Standard Base 229 x 251.2 x 98.5 mm (Shipping weight 2.0 kgs) With Standard Base + Add-On Base 239 x 251.2 x 170 mm (Shipping weight 3.1 kgs) BA71R-3 Operating Manual...
Page 12
Storage Temp. -20 °C to 60 °C. (-4 °F to 140 °F) Transport Temp. -20 °C to 60 °C. (-4 °F to 140 °F) Operating Humidity 10% to 85% without condensation. Storage Humidity 10% to 85% without condensation. BA71R-3 Operating Manual...
Tighten the two screws of the cable connector on both ends. Connect the power to the monitor through the AC / DC adapter. Connect the power cord on the AC outlet. BA71R-3 Operating Manual...
Page 17
Use hands to loosen the adjusting nut and adjust the display to a suitable view angle. Then fasten the adjusting nut (3). The angle of the screen can be adjusted from a horizontal position to a vertical position without any tools. BA71R-3 Operating Manual...
Page 18
The elevation angle is up to 90° for wall mount. For stand-up using, the elevation angle is limited to 30° to avoid toppling down from missing center-of-gravity position. The angle can be up to 90° when the monitor includes Add-On- Base. BA71R-3 Operating Manual...
Menu button again for more than 15 sec for unlock. Move / Adjustment up – Select Key Move / Adjustment down- Select key Enter / Auto Adjustment POWER MENU DOWN ENTER/MODE BA71R-3 Operating Manual...
Page 20
VGA and DVI mode When the light-bars moves to the item, the key can be used to select it, and ready to adjust. VGA mode Press this key can do the auto adjustment function. BA71R-3 Operating Manual...
If you want to discard the settings, just move to "RECALL" and press the Enter/Mode key. This will restore the pre-defined values) In the Non OSD mode, pressing this key can do the auto-adjustment function. BA71R-3 Operating Manual...
When OSD is displayed, press top and bottom key choice menu “AUTO ADJUST”, using Enter/Mode key to auto-adjust the display area to optimal display effects. Sometimes this function cannot achieve the optimal effect, please follow the "ADJUSTMENT PROCEDURE" mentioned above. On-Screen-Display Mode BA71R-3 Operating Manual...