Installation; Location - Kenwood KID60S10 Installation Instructions Manual

Installation

installation

location

When selecting a position for your dishwasher
you should make sure the installation surface
is flat and firm, and the room is well ventilated.
Avoid locating your dishwasher near a heat
source, e.g. cooker, boiler or radiator. Extreme
cold ambient temperatures may also cause
the appliance not to perform properly. This
dishwasher is not designed for use in a garage
or outdoor installation.
Do not drape the dishwasher with any covering.
When installing, ensure that free space is left at
the sides.
All parts removed must be saved to do
the reinstallation in the future. Ensure
the dishwasher is unplugged and empty.
We recommend that 2 people handle
the dishwasher during installation.
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required.
The supplied door template also
contains installation steps which will
assist installation.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement for
servicing when required. Good levelling is
essential for correct closure and sealing of
the door. When the unit is correctly levelled,
the door should not catch the inner liner on
either side of the cabinet. The adjustable
feet may be loosened or tightened in order to
obtain the optimum levelling of the unit.
6
KID60S10_IB_110426.indd 6
screw
cone
gear
level
level
level
level
level
4/27/11 5:47 PM