Installation; Location - Kenwood KDWTTB10 Installation Instructions Manual

installation

installation

location

When selecting a position for your
freestanding dishwasher you should make
sure the installation surface is flat and
firm, and the room is well ventilated. Avoid
locating your dishwasher near a heat source,
eg. cooker, boiler or radiator. Extreme cold
ambient temperatures may also cause the
appliance not to perform properly. This
dishwasher is not designed for use in a garage
or outdoors.
Do not drape the dishwasher with any
covering. When installing, ensure that free
space is left at the sides.
All parts removed must be saved to
do the reinstallation in the future.
Ensure the dishwasher is unplugged
and empty. We recommend that 2
people handle the dishwasher during
installation.
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required.
2. Ensure there is sufficient clearance
on each side of the unit to allow slight
sideways movement for servicing when
required. Good levelling is essential for
correct closure and sealing of the door.
When the unit is correctly levelled, the door
should not catch the inner liner on either
side of the cabinet. The adjustable feet
may be loosened or tightened in order to
obtain the optimum levelling of the unit.
The dimension of the dishwasher is 550(W)
x 500(D) X 438(H) in mm. The figure
outlines the minimum dimensions required
to accommodate the table top dishwasher.
Protect plastic parts and cables from high
temperatures.
50mm
or
150mm or more
more
500mm
unit in mm
50mm or more
438mm
150mm or more
5