Adjusting Salt Consumption - Kenwood KID60S10 Installation Instructions Manual

Adjusting Salt Consumption

Salt consumption must be adjusted to correspond to the water hardness level in your area. If you
don't know how hard the water in your home is, please ask the company that supplies water in your
area.
It is recommended that adjustments should be made in accordance with the following chart.
water hardness
˚dh ˚fh
0-8 0-14
8-22 14-39
22-45 39-80
>45 >80
1 ˚dh (German degree) = 1.25mmol/l
1 ˚fh (French degree) = 0.178mmol/l
1 ˚Clark (British degree) = 1.78mmol/l
• Do not use everyday table salt or cooking salt as they contain insoluble
substances which could damage the dishwasher.
• Do not pour detergent into the salt container. This will damage the dishwasher.
To optimise and customise the level of salt consumption, please follow the steps below.
1. Remove the lower basket and unscrew the reservoir cap.
2. There is an arrow-shaped indicator in the reservoir, which you can turn. You may turn it to the "-"
or "+" settings based on the water hardness in your area.
KID60S10_IB_110426.indd 19
selector
position
˚Clark mmol/l
0-10 0-1.4
10-28 1.4-3.9
28-56 3.9-8
>56 >8
turn
salt consumption
(gram/cycle)
/ 0
- 20
Mid 40
+ 60
number of
cycle / 1.2 kgs
/
60
30
20
19
4/27/11 5:48 PM