Kenwood KID60S10 Installation Instructions Manual page 8

installation
7. Position the dishwasher next to a water tap
and a drain. Ensure the water inlet and drain
hoses are not kinked or squashed. The unit
must not stand on the mains cable.
8. To secure the dishwasher under the table top,
tighten the screws through the top sides of
the unit onto the table top.
9. Tape the supplied Door Template to the
dishwasher door. Make sure the top of
the template is at the top of the door. Drill
the required holes following the depth and
diametre shown on the Door Template.
8
KID60S10_IB_110426.indd 8
<6.5kg
4/27/11 5:47 PM