Table of Contents
Advertisement
installation
installation
location
When selecting a position for your dishwasher
you should make sure the installation surface
is flat and firm, and the room is well ventilated.
Avoid locating your dishwasher near a heat
source, eg. cooker, boiler or radiator. Extreme
cold ambient temperatures may also cause
the appliance not to perform properly. This
dishwasher is not designed for use in a garage
or outdoors.
Do not cover the dishwasher. When installing,
ensure that free space is left at the sides.
All parts removed must be saved to do
the reinstallation in the future. Ensure
the dishwasher is unplugged and empty.
We recommend that 2 people handle the
dishwasher during installation.
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement for
servicing when required. Good levelling is
essential for correct closure and sealing of
the door. When the unit is correctly levelled,
the door should not catch the inner liner on
either side of the cabinet. The adjustable
feet may be loosened or tightened in order to
obtain the optimum levelling of the unit.
If required, the worktop of the dishwasher can
be removed. The height without the worktop
is 820 mm, the minimum dimensions required
to accommodate the dishwasher within fitted
kitchen furniture units.
1/2
Dela y
620
855
30
30
455
450
units in mm
On/ Off
Star t/Pau
se
Prog .
580
850
level
level
level
level
9
Advertisement
Table of Contents
