hints and tips
• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
• Before calling for service, please refer to Helpful Tips to solve some general problems by
yourself.
fault code
codes
E1
E4
technical problems
problem
The dishwasher does not start.
The drain pump is not working
properly.
28
KID60S10_IB_110426.indd 28
possible causes
Water tap is not turned on.
Low water pressure (<0.04MPa)
Flow meter is broken.
The wire terminals which connect the
flow meter are loose.
The tank is leaking.
The hose is leaking.
The float switch is broken or PCB is
faulty.
technical problems
possible causes
The door is not properly
closed.
The unit is not connected to
the mains socket.
The unit is not switched on.
Fault code E4 - The anti-
flooding system has operated.
remedy
Turn on the water tap.
Turn on the water tap and ensure it is in full
position.
• Disconnect from the mains socket.
• Disconnect the water inlet.
• Call a qualified technician.
remedy
Close the door firmly.
Connect the mains plug to the mains
socket.
Press the on/off button and select a
programme.
• Disconnect from the mains socket.
• Disconnect the water inlet.
• Call a qualified technician.
4/27/11 5:48 PM