Alliance Laundry Systems UW35PV Instructions Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. UW35PV Series
  6. Instructions manual
Alliance Laundry Systems UW35PV Instructions Manual

Alliance Laundry Systems UW35PV Instructions Manual

Washer-extractor variable-speed we-6 control
Hide thumbs Also See for UW35PV:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Operation & Maintenance Manual
Washer-Extractor
Pocket Hardmount
Variable-Speed
WE-6 Control
MC010J
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F232210
www.comlaundry.com
August 2004

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UW35PV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alliance Laundry Systems UW35PV

Summary of Contents for Alliance Laundry Systems UW35PV

  • Page 1 Washer-Extractor Pocket Hardmount Variable-Speed WE-6 Control MC010J Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. F232210 www.comlaundry.com August 2004...

  • Page 3: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232210 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 4 Transferring All Cycles from Simulator to Computer ..... 37 Transferring One Cycle from Simulator to Computer ..... 38 Preprogrammed Cycles................. 38 Cycle Categories ................39 Standard Supply Legend ..............39 Standard Cycle Charts..............40 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 5: Model Identification

    A record of each washer-extractor is on file with the manufacturer. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assitance. Refer to Figure 1. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 6 200 – 240 50 – 60 Drawings: ETL Listed Conforms To ANSI/UL Std. 1206, 3rd Ed Certified To CAN/CSA Std. C22.2 No.53-1968 EXAMPLE OF NAMEPLATE PHM533R PHM533R Figure 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 7: Introduction

    WE-6 control on the washer- extractor. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 8 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 9: Safety Information

    8. Do not reach into the washer if the wash drum is moving. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 10 19. Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this occurs, have washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 11: Programming

    © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 12: Setup Mode

    IMPORTANT: WE-6 door lock circuit MUST NOT allow entry into door until basket has come to a complete stop. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 13: To Enter Setup Mode

    Manual Mode will be disabled when a cycle is run, even if Manual operation keypad sequence is entered. To select enabling or disabling the alternate feature, press 0 keypad. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 14 Water flows out overflow connection for time assigned to step. Add Cycle Add Cycle Add Cycle is pressed to begin process of programming a new cycle into memory. Table 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 15 No Reverse is used to rotate basket in one direction only during a step and should be pressed just before pressing Enter keypad. Enter Enter Enter is pressed to enter programming information into control’s memory. Table 2 (Continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 16: Programming Tutorial

    “4M-00S”. (“4M” means 4 minutes and “00S” means 0 seconds.) 6. Press Enter keypad. Display will read “0201,” indicating that control is ready for step 2 of cycle 01. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 17 18. Press Enter keypad. Display will read “0801,” indicating that control is ready for step 6 of indicating that control is ready for step 8. cycle 01. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 18 Press Enter keypad. Display will read “M---S.” c. Enter length of time for medium-speed spin (one minute is recommended). Press 1 keypad. Display will read “1M-00S,” indicating 1 minute and 0 seconds. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 19: Programming Hints

    To skip forward in the test cycle, High Speed Spin No. 1 6:00 press the Advance keypad. SDLY 0:60 Stop Routine NOTE: The Advance feature may be disabled. Table 3 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 20: Wet Clean Testing

    2, key 3, and key 0 to enter the Manual Mode for 2 minutes and 30 seconds. 3. Then press the Add Step key. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 21: Auxiliary Connections

    The auxiliary drain line has a normally closed drain valve and exits the left rear of the machine. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 22: Cycle Programming

    NOTE: Prompting will change parameters in all cycles programmed. NOTE: Never press Clear keypad while displaying a cycle in memory except to edit or delete a step. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 23: Editing A Cycle

    NOTE: At any time, programmer can put the Program Mode switch in RUN position, and control will return to normal running mode, provided all data for last step edited is entered. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 24: Erasing A Cycle In Memory

    The machine is equipped with four water valves (two fill and two spray). Pressing the Warm keypad twice will turn on all four valves and reduce fill times. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 25 Warm + Warm + Overflow + Enter “WO” Both Hot and Both Cold to Overflow In addition to standard fill temperatures, computer-controlled fill or overflow to a specific temperature is available. Table 4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 26: Programming A Supply Step - Models With 8 Supplies

    Enter the time in minutes and seconds that supply injection should last. 4. Press Enter keypad and go to next step of cycle. Another step may be programmed or Program Mode may be exited. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 27 In these examples “nn” represents step number, and “cc” represents cycle number. * Supply 5 acts as a switching function between first and second supply banks. Table 5 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 28 X X 0 X X X X X 0 0 X X X 0 X X X X X 0 X X X X X Table 6 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 29: Programming Heat

    NOTE: In all wash steps except Wash 7, machine will automatically refill to most recent water level (if any), and drain will be closed. Table 7 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 30: Programming A Wash 5 Thermal Cool-Down

    “H---M.” Enter maximum time in hours and 7. Press Enter keypad. Another step may be minutes for control to reach target cool-down programmed or Program Mode may be exited. temperature. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 31: Programming No Reversing

    No Reverse keypad must be pressed prior to Mode may be exited. pressing Enter keypad when programming a step. Refer to Programming a Wash Step section. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 32: Programming A Drain Step

    4. Press Enter keypad. Another step may be programmed or Program Mode may be exited. 5. Press Enter keypad. Another step may be programmed or Program Mode may be exited. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 33: Programming A Fill Through Auxiliary Fill Valve With Third Party Water Reuse System

    NOTE: Do not program a “SDLY” time if followed by another spin. This will cause control to skip all consecutive spins and start next non-spin step. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 34: Spins

    NOTE: If a coast-down delay (“SDLY”) is desired after a spray rinse step, program a medium-speed spin step for one second after rinse step. Then program desired coast-down time. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 35: Auxiliary

    NOTE: If “NO WCL” is selected in prompting process, Auxiliary 1 operates as a timed output (remains on for time programmed). © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 36: Balance Detection

    4. Press Enter keypad. Display will read “M---S.” speed step. Enter auxiliary step desired time in minutes and seconds. 5. Press Enter keypad and go to next step in cycle. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 37: Simulator Operation And Program Transfer

    • As an instructional aid, the simulator can be used for teaching programming techniques to individuals unfamiliar with the UWPV WE-6 microcomputer. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 38 (gray to gray, blue to blue). © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 39: Transferring All Cycles From Computer To Simulator

    Program Mode. The display on both will read alternately. “CYC00.” When the two displays stop flashing, the transfer 3. Press the 0 key. The display will read “WRITE?” is complete. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 40: Transferring One Cycle From Simulator To Computer

    8. Press the Enter key. The simulator display will flash “SEND” and “CYC” alternately. The computer display will flash “RECV” and “CYC” alternately. When the two displays stop flashing, the transfer is complete. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 41: Cycle Categories

    33 Starch, extract only Formulas Common to All Markets 34 Uniforms, with bleach 35 Uniforms, without bleach 36 Rags/housekeeping, heavy soil 37 Rags/kitchen, mops 38 Rewash/reclaim 39 Test © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

  • Page 42: Standard Cycle Charts

    Supply Step – Models with 8 Supplies. As extra supplies are normally controlled by bank 2, Drain 1 1:00 program supplies 6, 7, 8, and 9. High Spin 3 (SDLY 0:45) 2:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 43 Supply 3 and 4 (Display: “SI”) 0:30 Wash 1 4:00 Wash 1 4:00 Drain 1 1:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 High Spin 3 (SDLY 0:45) 2:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 44 4:00 100°F (38°C) Fill to Low Level 5:00 Supply 3 and 4 (Display: “SI”) 0:30 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 2:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 45 110°F (43°C) Fill to Low Level 5:00 High Spin 3 (SDLY 0:45) 4:00 Supply 3 and 4 (Display: “SI”) 0:30 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 2:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 46 High Spin 3 (SDLY 0:45) 4:00 Warm Fill to Low Level 5:00 Supply 3 and 4 (Display: “SI”) 1:00 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 5:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 47 2:00 100°F (38°C) Fill to Low Level 5:00 Supply 3 and 4 (Display: “SI”) 0:30 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 48 2:00 100°F (38°C) Fill to Low Level 5:00 Supply 3 and 4 (Display: “SI”) 0:30 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 2:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 49 2:00 110°F (43°C) Fill to Low Level 5:00 Supply 3 and 4 (Display: “SI”) 0:30 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 50 110°F (43°C) Fill to Low Level 5:00 Supply 3 and 4 (Display: “SI”) 0:30 Wash 1 4:00 Drain 1 1:00 Medium Spin 1:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 51 0:30 Warm Spray Rinse 2:00 110°F (43°C) Fill to Low Level 5:00 Supply 3 0:30 Wash 1 3:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 52 Wash 1 4:00 Supply 5 0:30 Drain 1 1:00 Wash 1 5:00 High Spin 3 (SDLY 0:45) 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 53 Wash 1 4:00 Supply 5 0:30 Drain 1 1:00 Wash 1 5:00 High Spin 3 (SDLY 0:45) 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 54 Wash 1 4:00 Supply 5 0:30 Drain 1 1:00 Wash 1 5:00 High Spin 3 (SDLY 0:45) 1:15 Drain 1 1:00 High Spin 3 (SDLY 0:45) 1:15 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 55 Wash 1 2:00 Drain 1 1:00 Supply 5 0:30 High Spin 3 (SDLY 0:45) 1:15 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 1:15 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 56 Supply 5 0:30 Wash 1 4:00 Wash 1 4:00 Drain 1 1:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 57 Supply 4 0:30 Wash 1 4:00 Wash 1 3:00 Drain 1 1:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 High Spin 2 (SDLY 0:45) 1:30 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 58 1:00 110°F (43°C) Fill to Low Level 5:00 Supply 3 and 4 (Display: “SI”) 0:30 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 59 0:30 Warm Spray Rinse 2:00 110°F (43°C) Fill to Low Level 5:00 Supply 3 0:30 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 60 110°F (43°C) Fill to Low Level 5:00 High Spin 3 (SDLY 0:45) 4:00 Supply 3 and 4 (Display: “SI”) 0:30 Wash 1 4:00 Drain 1 1:00 High Spin 3 (SDLY 0:45) 4:00 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 61 Press Start to continue when alarm sounds. Times here are actual operating times if steps are allowed to progress to their end without pressing Advance. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...
  • Page 62 WARNING Use of any wet clean cycle prior to approval by a wet clean chemical manufacturer’s representative can result in damage to garments. SW034 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232210...

This manual is also suitable for:

Uw60pvUw125pvUw80pvUw100pv

Table of Contents