Alliance Laundry Systems F232201R4 Operation & Maintenance Manual
Alliance Laundry Systems F232201R4 Operation & Maintenance Manual

Alliance Laundry Systems F232201R4 Operation & Maintenance Manual

Pocket hardmount variable-speed we-6 control

Advertisement

Washer-Extractor
NOTA: El manual en
español aparece después
del manual en inglés.
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Refer to Page 9 for Model Identification
Pocket Hardmount
Variable-Speed
WE-6 Control
www.comlaundry.com
MC010J
Part No. F232201R4
December 2005

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F232201R4 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alliance Laundry Systems F232201R4

  • Page 1 Refer to Page 9 for Model Identification NOTA: El manual en español aparece después del manual en inglés. Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Pocket Hardmount Variable-Speed WE-6 Control MC010J www.comlaundry.com Part No. F232201R4 December 2005...
  • Page 3: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information... Explanation of Safety Messages...
  • Page 4 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201...
  • Page 5: Safety Information

    NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Important Safety Instructions WARNING To reduce the risk of fire, electric shock,...
  • Page 6 If this occurs, have washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 20. Replace worn power cords and/or loose plugs. 21. Be sure water connections have a shut-off valve and that fill hose connections are tight.
  • Page 7: Safety Decals

    Impact with door edges can cause personal injury. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Never touch internal or external steam pipes, connections, or components.
  • Page 8: Operator Safety

    © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safe Operating Environment Safe operation requires an appropriate operating environment for both the operator and the machine. If questions regarding safety arise, contact the manufacturer immediately.
  • Page 9: Machine Location

    Do not operate the machine with missing guards or with broken or missing parts. Do not bypass any safety devices. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Input and Output Services • Water Pressure. Best performance will be realized if water is provided at a pressure of 30 –...
  • Page 10: Ac Inverter Drive

    AC inverter drive. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT This manual is designed as a guide to operating and maintaining the Pocket Hardmount washer-extractor equipped with the AC inverter drive.
  • Page 11: Introduction

    Below Inverter Exhaust Fan on Electric Heat Box (if equipped) Side of AC Drive Compartment Figure 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Introduction Replacement Parts If literature or replacement parts are required, contact...
  • Page 12 Drawings: ETL Listed Conforms To ANSI/UL Std. 1206, 3rd Ed Certified To CAN/CSA Std. C22.2 No.53-1968 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Model Number Familiarization Guide Sample Model Number: UW60PVXU80001 P = WE-6 Control...
  • Page 13: Operation

    Emergency Stop Button Supply Valve Box Supply Dispenser Door Latch Handle Door Handle Door Box Door Latch Extension Arm © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Operation Figure 3 PHM1389C Door Latch Side Panel...
  • Page 14 Emergency Stop Button Supply Valve Box Supply Dispenser Spray Rinse Tube Side Panel Rub Rail © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Shell Front Basket Jog Button (Optional) Door Latch Handle Door Box Door Unlock Button...
  • Page 15: Theory Of Operation

    Depending on the design series, the vibration switch will perform in either of two ways. If the washer-extractor utilizes ONLY the © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 vibration switch to detect an out-of-balance load, the...
  • Page 16: Emergency Stop Button

    Refer to Programming manual for additional details. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT LED Display The WE-6 control has a six-digit LED display.
  • Page 17 SEt UP Perform model setup routine Fill from reuse tank A to medium level Table 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Display Interpretations Fill from reuse tank A to high level Fill from reuse tank B to low level...
  • Page 18 Auxiliary 2, if selected). This should not be confused with the “dual drain” option. Advance (skip steps) feature enabled Table 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Display Interpretations NO ADV Advance feature disabled WET CL...
  • Page 19: Operational Keypad

    Manual See Manual Mode Control Feature at the end of this section. * If cycle in a spin coast delay, display shows speed of basket. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Operational Keypad...
  • Page 20 Refer to Figure 6. Out-of-Balance Indicator Door Lock Switch Program Mode © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT High Level Fill Indicator Medium Level Fill Indicator Low Level Fill Indicator...
  • Page 21: Pre-Operating Instructions

    Refer to Figure 7. UW35 – UW125 MODELS Figure 7 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 WARNING Do not operate machine in a cycle with program keymode switch in program position.
  • Page 22 Refer to Figure 9. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 6. Load the washer-extractor to full capacity whenever possible, but do not exceed the rated...
  • Page 23 “01” indicates that this is the first step of the cycle. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 As the cycle proceeds, the display will show the function being executed, the step number, and the cycle number selected.
  • Page 24: Stop Routine

    © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT The display will read “W1-cc,” “W2-cc,” or “W3-cc” for Wash 1, Wash 2, or Wash 3 action during the shakeout portion of the stop routine until the final 10 seconds.
  • Page 25: Basket Jog Feature (Uw150 Models Only)

    Keep all personnel at a safe distance from the machine while using the basket Jog Feature. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Temperature Display The temperature display can be prompted to display in Fahrenheit or Centigrade.
  • Page 26: Error Recovery Routine

    NOTE: The “TEMP” alarm can be recovered only after the temperature falls below the alarm level. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Certain error conditions are considered to be non- recoverable: •...
  • Page 27: Maintenance

    Where possible, space is provided on the checklists for this purpose. The following maintenance procedures must be performed regularly at the required intervals. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Maintenance Daily Beginning of Day 1.
  • Page 28: End Of Day

    Leave loading door open at the end of each completed cycle to allow moisture to evaporate. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Weekly 1. Check the washer-extractor for leaks. a. Start an unloaded cycle to fill the washer- extractor.
  • Page 29: Monthly

    V-belts are properly tensioned. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 • Tension Gauge. Loosen motor mounting bolts and slide motor along motor plate to change belt span length.
  • Page 30: Quarterly

    10. Remove chemical supply components and check for residual chemicals. Clean as necessary and replace. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Quarterly NOTE: Disconnect power to the washer-extractor before performing the quarterly maintenance procedures.
  • Page 31: Care Of Stainless Steel

    • Remove discoloration or heat tint from overheating by scouring with a powder or by employing special chemical solutions. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 • Do not leave sanitizers or sterilizing solutions on stainless steel equipment for prolonged periods of time.
  • Page 32: Daily Preventive Maintenance Checklist

    NOTE: Unload the machine promptly after each completed cycle to prevent moisture buildup. Leave loading door open after each completed cycle to allow moisture to evaporate. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Checks Observe All Safety Warnings!
  • Page 33: Weekly Preventive Maintenance Checklist

    Start an unloaded cycle to fill the machine. b. Verify that door and door gasket do not leak. c. Verify that the drain valve is operating. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Checks...
  • Page 34: Monthly Preventive Maintenance Checklist

    9. Clean interior of washer-extractor, both basket and shell, by wiping with a water- soaked sponge or cloth. 10. Use compressed air to clean moisture and dust from all electrical components. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Checks Observe All Safety Warnings!
  • Page 35: Quarterly Preventive Maintenance Checklist

    3. Verify that the drain motor shield is in place and secure. 4. Check all painted surfaces for bare metal. Repair, if necessary. 5. Clean steam filter, if applicable. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232201 Checks...

Table of Contents

Save PDF