Alliance Laundry Systems UW100TV Installation Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. UW100TV
  6. Installation manual
Alliance Laundry Systems UW100TV Installation Manual

Alliance Laundry Systems UW100TV Installation Manual

Washer-extractors
Hide thumbs Also See for UW100TV:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, Programming Manual
Washer-Extractors
Pocket Hardmount
UniLinc
Refer to Page 5 for Model Numbers
PHM1400C
PHM1400C
35 – 125 Models
PHM1402C
PHM1402C
150 Model
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F8138601R12
www.alliancelaundry.com
October 2012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UW100TV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alliance Laundry Systems UW100TV

Summary of Contents for Alliance Laundry Systems UW100TV

  • Page 1 Washer-Extractors Pocket Hardmount UniLinc Refer to Page 5 for Model Numbers PHM1400C PHM1400C 35 – 125 Models PHM1402C PHM1402C 150 Model Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. F8138601R12 www.alliancelaundry.com October 2012...

  • Page 3: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F8138601 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 4: Safety Information

    6. To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electrical power source. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 5 The air gap must be maintained. 17. Do not operate the machine without the water reuse plug or water reuse system in place, if applicable. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 6: Safety Decals

    Use manufacturer-authorized spare parts to avoid WARNING safety hazards. Operating the machine with severe out-of- balance loads could result in personal injury and serious equipment damage. W728 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 7: Introduction

    Introduction Model Identification Information in this manual is applicable to these models: UW35TV UW60TV UW80TV UW100TV UW125TV UW150TV © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 8: Delivery Inspection

    Always provide the machine’s serial 3. Press the keypad. number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1 and Figure 2. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 9 Design Series Option Identification (varies from machine to machine) 0001 UW060TVQU10001 00000000000 200 – 240 50 – 60 500000 EXAMPLE OF SERIAL PLATE PHM697N PHM697N Figure 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 10: Specifications And Dimensions

    Number of motors in drive train Drive motor power, hp (kW) 5.0 (3.7) 5.0 (3.7) 7.5 (5.6) 7.5 (5.6) 10 (7.5) 10 (7.5) * Basket Only (Continued) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 11: Balance Detection

    2.2 (3.4) 2.8 (4.2) raise bath temperature 2.7 (4.1) 2.7 (4.1) 2.5 (3.9) 3.2 (4.8) 10°F, min (5°C, min) HIGH 3.1 (4.7) 3.0 (4.6) 3.0 (4.5) 3.7 (5.6) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 12: Machine Dimensions

    2.75 Overhang dimensions for the optional starch dispenser are as follows:UW35TV, 3.88 inches (9.86 cm); UW60TV, 1.75 inches (4.45 cm); UW80TV and UW100TV, 0.33 inch (0.83 cm). (The starch dispenser does not overhang the UW125TV.) (No longer available.) The overhang dimension for the premium wet clean module option (compatible with wet-clean-capable washer-extractors only) adds 24 inches (60.96 cm) to combined machine dimensions E and G.
  • Page 13 Emergency Stop Button Power Input (Non-Electric Heat Models) Supply Dispenser Drain (UW80TV, UW100TV and UW125TV models only) Door Handle Spray Rinse Nozzle Drain Recirculation Inlet Overflow Vent Figure 3 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 14 Shell Vent Emergency Stop Button Water Inlet Valves Supply Valve Box Steam Connection (Optional) Supply Dispenser Power Input Spray Rinse Nozzle Drain Door Handle Overflow Vent Figure 4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 15: Machine Foundation Requirements

    Never allow the inspection and maintenance space to be blocked. W760 WARNING To reduce the risk of fire, this appliance must be bolted to an uncovered concrete floor. W743 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 16: Concrete Foundation Pad Installation

    8 inches (203 mm) above the existing floor. 5. Refill with compacted fill dirt, making sure to allow for correct concrete thickness. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 17 48.125 in. 59.625 in. 65.125 in. 65.125 in. 72 in. 74.25 in. (1222 mm) (1514 mm) (1654 mm) (1654 mm) (1829 mm) (1886 mm) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 18: Floor Load Data

    4249 (5.8) 8895 (12.1) 11951 (16.2) 11984 (16.3) 16606 (22.5) 16707 (22.7) greater Acting in the downward direction against the floor. Acting in the upward direction away from the floor. Table 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 19: Mounting Bolt Installation Requirements

    0.75 in. (19 mm) 2 in. (51 mm) 8 in. (203 mm) PHM722N PHM722N Machine Frame Base Mounting Bolt Threads Grouting Cement or Structural Epoxy Figure 6 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 20: Machine Mounting And Grouting

    Refer to Figure 13. Force grout under machine base until all voids are filled. 6. Remove the spacers carefully, allowing the machine to settle into the wet grout. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 21: Mounting Bolt Hole Locations

    34.16 in. (868 mm) 26.125 in. 2 in. (664 mm) 2 in. (51 mm) (51 mm) 30.125 in. (765 mm) 35 MODEL FRONT OF MACHINE PHM630N Figure 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 22 2 in. (51 mm) (51 mm) 31.625 in. (803 mm) 0.75 in. (19 mm) 35.625 in. (905 mm) 60 VARIABLE-SPEED MODEL FRONT OF MACHINE PHM631N Figure 9 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 23 (892 mm) 3 in. 3 in. (76 mm) (76 mm) 41.125 in. 0.75 in. (1045 mm) (19 mm) 80 / 100 MODELS FRONT OF MACHINE PHM632N Figure 10 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 24 (387 mm) 23.25 in. 23.25 in. (591 mm) (591 mm) 48 in. (1219 mm) 0.75 in. (19 mm) 125 MODEL FRONT OF MACHINE PHM633N PHM633N Figure 11 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 25 (102 mm) 1.5 in. 1.5 in. (38.1 mm) (38.1 mm) 47 in. (1193 mm) 50 in. (1270 mm) 150 MODEL PHM778N FRONT OF MACHINE PHM778N Figure 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 26: Grout Placement

    22 in. 4.06 in. (559 mm) (103 mm) 8 in. typical 8 in. (203.2 mm) (203.2 mm) typical typical 125 MODEL 150 MODEL PHM180N PHM605N PHM605N Figure 13 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 27: Gap Setting For Vibration Switch

    Inputs Outputs the vibration switch. Menu. For UniLinc models, to return to the Cycle Menu press BACK key several times until Cycle Menu is displayed. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 28 Specifications and Dimensions 35 Pound Model ADJUSTMENT BOLT VIBRATION SWITCH PHM794N PHM794N Figure 14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 29 Specifications and Dimensions 60, 80, 100 and 125 Pound Models VIBRATION ADJUSTMENT BOLT SWITCH PHM795N PHM795N Figure 15 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 30 Specifications and Dimensions 150 Pound Model VIBRATION SWITCH PHM716N PHM716N Figure 16 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 31: Drain Connection Requirements

    Increasing the drain hose length, installing elbows, or causing bends will decrease drain flow rate and increase drain times, impairing washer-extractor performance. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 32 8 (203) 4 (102) 6 (152) 6 (152) 8 (203) 4 (102) 6 (152) 6 (152) 8 (203) 4 (102) 6 (152) 6 (152) 8 (203) Table 4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 33: Water Connection

    Line Sizing table. Installation of additional machines will require proportionately larger water lines. Refer to Table 6. Flush the water lines before connecting them to the machine. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 34 2 (50) 1.25 (32) 2.5 (64) 2 (50) 2.5 (64) 2 (50) 2.5 (64) 2.5 (64) Table 6 P038I P038I Air Cushions (Risers) Water Supply Faucets Figure 19 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 35: Electrical Installation Requirements

    Check the serial plate on the back of the washer-extractor for recommended circuit breaker requirements size. IMPORTANT: Do NOT use fuses in place of a circuit breaker. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 36 If rotation is not clockwise, disconnect the power from the machine and have a qualified electrician reverse any 2 motor leads. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 37 Circuit breakers should be UL 489 listed or better. Single phase circuit breakers for single phase machines only; three phase circuit breakers for all others. Table 7 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 38: Steam Requirements (Steam Heat Option Only)

    (bar) (2.0 – 5.9) (2.0 – 5.9) (2.0 – 5.9) (2.0 – 5.9) (2.0 – 5.9) Maximum pressure, psi (bar) (5.9) (5.9) (5.9) (5.9) (5.9) Table 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 39: Chemical Injection Supply System

    Ensure an eye-rinse facility and an emergency shower are within easy reach. Check at regular intervals for chemical leaks. SW016 PHM825N Injection Point Chemical Dispenser Pump Outlet Loops PVC Pipe Figure 23 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 40 This bracket is present only on models made through 6/30/08. Refer to Figures 3 and 4. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...
  • Page 41 Dry Supply Cups Supply Dispenser Lid Dry Supply Insert Nozzles Polypropylene Supply Dispenser IMPORTANT: Do not attach anything to nozzles. Air gap must be maintained. Figure 25 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 42: External Supplies

    = Neutral = Power PHM821N External Supply Power Red Jumper Wire Internal Control Transformer 24VAC Terminal RELAY COM Terminal 24VAC COM Terminal External Supply Common Figure 26 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 43: Chemical Injection Using External Ac Power Source

    Optional External Supply Wiring Diagram. W699 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 44: External Supply Signals

    Supply Connection or Figure 29 for External AC equipment. Connection. = Neutral = Power PHM822N ES1 Power supply Supply 1 Signal K1 Contact Figure 28 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

  • Page 45: F8138601 © Copyright, Alliance Laundry Systems Llc – Do Not Copy Or Transmit

    Specifications and Dimensions = Neutral = Power PHM824N ES1 Power supply Supply 1 Signal K1 Contact Figure 29 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8138601...

This manual is also suitable for:

Uw80tvUw60tvUw150tvUw35tvUw125tv

Table of Contents