Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Alliance Laundry Systems F232182R1
Summary of Contents for Alliance Laundry Systems F232182R1
- Page 1 Washer-Extractors Pocket Hardmount Variable-Speed V-Series Microcomputer Refer to Page 9 for Model Identifiction Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. F232182R1 www.comlaundry.com March 2006...
-
Page 3: Table Of Contents
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety... Key to Symbols... - Page 4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232182...
- Page 5 Do not leave children unattended while the machine door is open. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety This machine must be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of this type of machinery.
-
Page 6: Key To Symbols
Guards should always be in place when the machine is in operation. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT This warning symbol indicates the presence of possibly dangerous chemicals. Proper precautions should be taken when handling corrosive or caustic materials. - Page 7 If questions regarding safety arise, contact the factory immediately. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT THIS MACHINE MUST BE PROTECTED External Supply...
-
Page 8: Operator Safety
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safe Operating Environment Safe operation requires an appropriate operating environment for both the operator and the machine. If questions regarding safety arise, contact the factory immediately. -
Page 9: Machine Location
Do not bypass any safety devices. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Input and Output Services Water Pressure. Best performance will be ● realized if water is provided at a pressure of 30 –... -
Page 10: Ac Inverter Drive
AC inverter drive. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Misuse Never use this machine for any purpose other than washing fabric with water. -
Page 11: Introduction
We reserve the right to make changes at any time without notice. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Introduction Customer Service If literature or replacement parts are required, contact... - Page 12 Drawings: ETL Listed Conforms To ANSI/UL Std. 1206, 3rd Ed Certified To CAN/CSA Std. C22.2 No.53-1968 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Model Number Familiarization Guide Sample Model Number: UW60VVXU70001 EXAMPLE OF NAMEPLATE Figure 2...
-
Page 13: Machine Familiarization Guide
Emergency Stop Button Supply Valve Box Supply Dispenser Door Handle Door Box Door Latch Extension Arm Door Latch F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Down Start Stop P005I Side Panel Front Panel Rub Rail... - Page 14 Notes F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
-
Page 15: Programming
Program Mode, pay careful attention to the programming instructions provided in this manual. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming Key Functions in Program Mode Up – The Up key is used to increase cycle numbers (1 through 30) and other numerical values such as times or temperatures (when creating wash formulas). -
Page 16: Degrees Displayed In Fahrenheit Or Celsius
Also remove the input power to the drive. NOTE: If this step is not followed, damage can occur to the calibration temperature probe. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT NEVER insert hands or objects into basket until it has completely stopped. -
Page 17: Auxiliary Heat
If “noCL” is selected, this feature is disabled. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Cycle Count To display the current cycle count, press the Start key while the display is showing the temperature in the sump. -
Page 18: Cycle Options
30 cycles. When “Ag 3” or “Ag 4” is in effect, there is no agitation during the fill. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Agitation Speed If “AgSn” or “AgSL” is selected, the machine will default to normal wash speed regardless of the setting. - Page 19 Set this value to zero to skip the segment. Press the Start key. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT NOTE: The computer does not count down the remaining cycle time during fills, drains, cool- down, or prior to first achieving the programmed heat temperature when heating.
- Page 20 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 10. Use the Up or Down key to select the desired drain option. If “drAI” is selected, the machine will drain after the segment time has elapsed.
-
Page 21: Test Cycle
F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT g. The auxiliary heat output is energized, provided that the water level switch indicates that at least low water level is present. - Page 22 The display shows “SPn1” (cylinder rotating at low spin speed). The basket rotates at low spin speed for 60 seconds. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT v. The cylinder accelerates to medium spin speed. The display shows “SPn2” (cylinder ”...
-
Page 23: Cycle Segment Charts
† This value is not available when temperature-controlled fill and auxiliary heat setup options are disabled. ‡ If “nodr” is selected, the computer skips the spin step and goes on to the next segment. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Segment 1 (PreWash) Instructions Use Up or Down key to change. - Page 24 † This value is not available when temperature-controlled fill and auxiliary heat setup options are disabled. ‡ If “nodr” is selected, the computer skips the spin step and goes on to the next segment. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Segment 2 (Wash) Instructions Use Up or Down key to change.
- Page 25 ‡ If “nodr” is selected, the computer skips the spin step and goes on to the next segment. F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Segments 3 – 10 (Fills 1 – 8) Instructions Use Up or Down key to change.
- Page 26 ***“SUP5” and “SUP6” can be selected only if the “SUP5”/“AFIL” setup option is set to “SUP5.” † This value is not available when temperature-controlled fill and auxiliary heat setup options are disabled. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Segment 11 (Fill 9) Instructions Use Up or Down key to change.
-
Page 27: V-Computer Cycle Charts
Time (Min) Water Warm Level Supply Temp (F) Drain DrAI Spin (Sec) F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT V-Computer Standard OPL Cycles Permanent Cotton Permanent Press Terrycloth Press Medium Soil Medium Soil Heavy Soil... - Page 28 Fill 9 Time (Min) Water Warm Level Supply Temp (F) Drain Spin SPn3 Spin (Min) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Permanent Cotton Permanent Press Terrycloth Press Medium Soil Medium Soil Heavy Soil Warm...
- Page 29 Warm Level High High Supply Temp (F) Drain DrAI DrAI Spin (Sec) F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Personals Rags Reclaim with Heavy Soil Bleach Ag 1 Ag 1 Ag 1 AgSn AgSn...
- Page 30 Time (Min) Water Level Supply Temp (F) Drain Spin Spin (Min) NOTE: Preprogrammed cycles 17 – 20 are blank. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Personals Rags Reclaim with Heavy Soil Bleach Warm Warm...
- Page 31 Medium Medium Medium Supply Temp (C) Drain DrAI DrAI DrAI Spin (Sec) F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT V-Computer Export OPL Cycles Permanent Normal Normal Press 60°C 40°C 90°C (PreWash) (PreWash) Ag 1...
- Page 32 Level Medium Medium Medium Supply Temp (C) Spin SPn3 SPn3 SPn3 Spin (Min) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT V-Computer Export OPL Cycles (Continued) Permanent Normal Normal Press 60°C 40°C 90°C (PreWash) (PreWash) Cold...
-
Page 33: Cycle Programming Worksheet
Spin (Sec) Fill 7 Time (Min) Water Level Supply Temp Drain Spin (Sec) F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT PreWash Time (Min) Water Level Supply Temp Drain Spin (Sec) Fill 2 Time (Min)
Need help?
Do you have a question about the F232182R1 and is the answer not in the manual?
Questions and answers