Table of Contents
Advertisement
Quick Links
Washer-Extractors
NOTA: El manual en
español aparece después
del manual en inglés.
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Pocket Hardmount
A-Series Microcomputer
UW100AV
UW125AV
www.comlaundry.com
UW35AV
UW60AV
UW80AV
PHM1379C
PHM1379C
Part No. F232227
January 2006
Advertisement
Table of Contents
Related Manuals for Alliance Laundry Systems UW100AV
Summary of Contents for Alliance Laundry Systems UW100AV
- Page 1 Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Pocket Hardmount A-Series Microcomputer UW35AV UW60AV UW80AV UW100AV UW125AV PHM1379C PHM1379C www.comlaundry.com Part No. F232227 January 2006...
-
Page 3: Table Of Contents
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information... Explanation of Safety Messages... - Page 4 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232227...
-
Page 5: Safety Information
F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information Important Safety Instructions To reduce the risk of fire, electric shock, serious injury or death to persons when... - Page 6 If this occurs, have washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 19. Replace worn power cords and/or loose plugs. 20. Be sure water connections have a shut-off valve and that fill hose connections are tight.
-
Page 7: Introduction
This is located behind the machine control panel. F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Introduction Control Output Fuse Board This portion of the control contains the power supply... -
Page 8: Nameplate Location
Customer Service For technical assistance, call: (920) 748-3121 Ripon, Wisconsin. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Summary of Control Outputs and Inputs Outputs General outputs provide signals to operate the following components. - Page 9 ETL Listed Conforms To ANSI/UL Std. 1206, 3rd Ed Certified To CAN/CSA Std. C22.2 No.53-1968 F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Model Number Familiarization Guide Sample Model Number: UW60AVXU80001 A = A – Control...
- Page 10 Notes F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
-
Page 11: Operation
Cycle Keypad “2” Cycle Keypad “4” Cycle Keypad “6” Stop/Down Edit START Keypad Door Open LED F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation Figure 2 CHM1766C Spin Cycle LED Rinse Cycle LED Add Bleach LED... -
Page 12: Summary Of Major Features
Drain Options Cycle Count © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT LED lights inform operator which machine function is active. DOOR LED lights to inform operator that the door can be opened or should be closed. The circle LED indicates that the filter needs cleaning. -
Page 13: Display Indicators
Display all temperatures in degrees Celsius Display all temperatures in degrees Fahrenheit The first 3 digits are reserved for temperature reading, C indicates “degrees Celsius” ___C F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Meaning Table 2 Operation... - Page 14 Drain selected for segment; also indicates in drain step during 2 speed version test cycle drAI Flashes for a period of time (for safety) after power up while keeping outputs OFF ---- © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Meaning Table 2 (Continued) F232227...
-
Page 15: Operating Instructions
Refer to Figure 4. Figure 4 F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. Load the washer-extractor to full capacity whenever possible, but do not exceed the rated... - Page 16 ‘doNE’. The door can be unlocked. At this point the washer-extractor may be unloaded. When the door is opened, the display will revert to showing “----” and the default cycle. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Cycle Number Permanent Press Light Soil...
-
Page 17: Maintenance
The following maintenance procedures must be performed regularly at the required intervals. F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance Daily Beginning of Day 1. Inspect water inlet valve hose connections on the back of the washer-extractor for leaks. -
Page 18: End Of Day
Leave loading door open at the end of each completed cycle to allow moisture to evaporate. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Weekly 1. Check the washer-extractor for leaks. - Page 19 Retighten motor mounting bolts before verifying belt tension. F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Deflection. Refer to Figure 6. Loosen ● motor mounting bolts and slide motor along motor plate to change belt span length.
-
Page 20: Quarterly
8. Use compressed air to clean lint from motor. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9. Clean interior of washer-extractor, both basket and shell, by wiping with a water-soaked sponge or cloth. -
Page 21: Care Of Stainless Steel
Use stainless steel wool or soft non-metal bristle brushes. F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT If the stainless steel appears to be rusting, the ● source of the rust may actually be an iron or steel part not made of stainless steel, such as a nail or screw. -
Page 22: Daily Preventive Maintenance Checklist
NOTE: Unload the washer-extractor promptly after each completed cycle to prevent moisture buildup. NOTE: Leave loading door open after each completed cycle to allow moisture to evaporate. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Week Of Observe All Safety Warnings! daily maintenance procedures. -
Page 23: Weekly Preventive Maintenance Checklist
Start an unloaded cycle to fill the washer-extractor. b. Verify that door and door gasket do not leak. c. Verify that the drain valve is operating. F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Checks Observe All Safety Warnings! weekly maintenance procedures. -
Page 24: Monthly Preventive Maintenance Checklist
9. Clean interior of washer-extractor, both basket and shell, by wiping with a water-soaked sponge or cloth. 10. Use compressed air to clean moisture and dust from all electrical components. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Checks Observe All Safety Warnings! monthly maintenance procedures. -
Page 25: Quarterly Preventive Maintenance Checklist
4. Check all painted surfaces for bare metal. Repair, if necessary. 5. Clean steam filter, if applicable. 6. Check vibration safety switch gap setting to switch function. F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Checks Observe All Safety Warnings! quarterly maintenance procedures. - Page 26 Notes F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
-
Page 27: Removal From Service
Have a qualified electrician disconnect power to machine and reuse unit, if applicable, at its source. F232227 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. Disconnect hoses. a. Disconnect drain hose from sump, gutter, or drain.
Need help?
Do you have a question about the UW100AV and is the answer not in the manual?
Questions and answers