Power; Moving The Scanner - Canon DR-2050SP User Manual

Power

• Connect only to a power outlet of the rated voltage and power supply
frequency. (either 120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your
region)
• Do not connect other electrical equipment to the same power outlet to which
the scanner is connected. Also, when using an extension cord, make sure that
the extension cord is rated for the current requirements of the scanner.
• Never try to disassemble the AC adapter or modify it in any way, as this is
extremely dangerous.
• The power cord and AC adapter may become damaged if they are often
stepped on or if heavy objects are placed on them. Continued use of a
damaged power cord and AC adapter can lead to an accident, such as a fire
or electrical shock.
• Do not use the power cord while it is coiled.
• Do not pull directly on the power cord. When disconnecting the power cord,
grasp the plug and remove it from the outlet.
• Keep the area around the power plug clear of objects so that the power cord
can be disconnected easily in an emergency.
• Use only the AC adapter provided with this scanner. Also, do not use the AC
adapter provided with the scanner with any other electrical devices.
Model: MG1-3607
• If you have any questions regarding the power supply, contact your local
authorized Canon dealer or service representative for further information.

Moving the Scanner

• When moving the scanner, always hold it with both hands to avoid dropping
it. The scanner weighs approximately 5.5 lb (2.5 kg).
• Before moving the scanner, make sure to disconnect the interface cables and
AC adapter. If the scanner is transported with these items connected, the
plugs and connectors may be damaged due to excessive force applied to
them during movement.
Before Using the Scanner
7