Removing And Attaching The Retard Roller - Canon DR-2050SP User Manual

3.
Lower the lever to lock the roller shaft.
4.
Close the roller cover. Return the cover fully to its original position until you
hear it click into place.
5.
Gently press the left and right sides of the top of the Front Unit. Return the unit
fully to its original position until you hear it click into place.

Removing and Attaching the Retard Roller

Follow the procedure below to remove and attach the retard roller for cleaning
or replacement.
Note
When attaching the feed roller during installation, operate the roller fastening
lever according to the removal procedure and then attach the feed roller.
68
Appendices