Canon DR-2050SP User Manual page 13

• If the scanner makes strange noises, or gives off, smoke, heat,
or strange odors, or the scanner does not function or other
abnormalities occur when you use the machine, immediately
turn the power switch OFF, and disconnect the power plug from
the power outlet. Then, contact your local authorized Canon
dealer or the service representative for further information.
• Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately turn the
power switch OFF, and disconnect the power plug from the
power outlet. Then, contact your local authorized Canon dealer
or service representative to have the unit serviced.
• Before moving the scanner, be sure to turn the power switch
OFF, and disconnect the power plug from the power outlet.
CAUTION
• Do not install the scanner on a surface that is unstable or tilted,
or in an area subject to excessive vibrations, as this may cause
the scanner to fall, resulting in personal injury or damage to the
scanner.
• Do not block the ventilation openings. Doing so could cause the
scanner to overheat, creating a risk of fire.
• Never place small metal objects such as staples, paper clips, or
jewelry on the scanner. These items may fall into the scanner,
and cause a fire or electric shock. Should such objects ever fall
inside the scanner, immediately turn the power switch OFF, and
disconnect the power plug from the power outlet. Then, contact
your local authorized Canon dealer or service representative to
have the unit serviced.
• Do not locate the scanner in a humid or dusty location. Doing so
might cause fire or electric shock.
• Do not place objects on top of the scanner. Such objects may tip
or fall over, resulting in personal injury.
• To prevent any risk of fire or electric shock, make sure that the
power source meets the power requirements of the unit.
• When unplugging the power cord, grasp it firmly by its plug. Do
not pull directly on the power cord, as this may damage or
expose the cord's internal wiring, resulting in a fire or electric
shock.
• Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug,
you will be unable to unplug it in an emergency.
• Do not allow water or flammable substances (alcohol, paint
thinner, benzene, etc.) to spill into the scanner, as this may
result in a fire or electric shock.
Before Using the Scanner
9