Wired Lan Connection; Connecting The Power Cord - Canon imageFORMULA CR-120N User Manual

Wired LAN Connection

Ethernet connection (CR-150N/120N only)
Allows the use of this scanner from other computers connected to the
network.
Prepare a LAN cable separately.
LAN Port
NOTE
• If connecting to the computer through this scanner confirm if the computer
is able to connect to the network.
• The settings method and configuration of network devices such as routers
vary depending on the environment in which they are being used. Refer to
the manual of the network device for details.

Connecting the Power Cord

Connect the power cord.
Make sure to use only the power cord provided with the scanner.
WARNING
When connecting the power cord, follow these precautions. Failure to
do so may cause a fire or electrical shock.
• Never grasp the power plug when your hands are wet.
• Never plug the scanner into a multiplug power strip.
• Never bundle or tie the power cord around itself or another object.
Connect the power plug securely into the power outlet.
• Use only the power cord and power plug provided with the scanner.
• Connect only to a power outlet of the rated voltage and power supply
frequency (either 100-120 V, 60 Hz or 220-240 V, 50/60 Hz, depending
on your region).
• Do not plug the scanner into a power outlet shared with another
device. If you use an extension cord, make sure that the extension
cord is rated for the current requirements of the scanner.
9