Setting The Output Terminal/Black And White Switching Terminal [Alarm] - Panasonic WV-NW484S Setup Manual

Setting the output terminal/black and
white switching terminal [Alarm]
Click the [Alarm] tab on the "Alarm setup" page.
Settings relating to whether to use the output terminal as an alarm output terminal or for black and white input
are configured on this page.
(1)
(2)
(3)
(4)
■ External terminal setup
No. Item
(1) [External terminal setup]
Default: Alarm output
Alarm output
Black and white
input
(2) [External terminal output
setup]
Default: Latch
Latch
Pulse
Set whether or not to use the output terminal as an alarm output terminal
or for black and white input.
The output terminal is used as an alarm output terminal. When the output
terminal is used as an alarm output terminal, set the following items
[External terminal output setup], [Alarm output] and [Pulse width].
The output terminal is used for black and white input.
Select "Latch" or "Pulse" as the operation of the alarm output terminal
when an alarm is detected.
When an alarm is detected, the alarm output terminal will change to the
state selected for the [Alarm output] setting until the alarm occurrence
indication button on the "Live" page is clicked.
When an alarm is detected, the alarm output terminal will change to the
state selected for the [Alarm output] setting for the duration set at [Pulse
width].
38
Description
(1/2)