Table of Contents
Advertisement
10 Configure the alarm settings [Alarm]
10.2.6 Configure settings relating to HTTP alarm notification when
an alarm occurs
Click "HTTP alarm notification >>" of "Camera action on alarm" on the [Alarm] tab of the "Alarm" page.
(®page 101)
Refer to page 119 for information on configuration for these settings.
10.3 Configure the settings relating to the alarm
output terminal [Alarm]
Click the [Alarm] tab on the "Alarm" page. (®page 32, page 34)
The settings relating to the alarm output terminal can be configured in this section.
Alarm output terminal setup
[Alarm output trigger]
Select "On" or "Off" to determine whether or not to output the alarm signals to the alarm output terminal when
an alarm is detected.
•
Default: Off
108
Operating Instructions
Advertisement
Table of Contents
