Setting The Sd Memory Card [Sd Memory Card] - Panasonic WV-NW484S Setup Manual

Setting the SD memory card [SD memory
card]
Click the [SD memory card] tab on the "Basic setup" page.
Settings relating to the SD memory card can be configured on this page.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
■ SD memory card
No. Item
(1) [SD memory card]
Default: Not use
Use
Not use
(2) [Notification of remaining]
Default: 50%
Select whether or not to use the SD memory card.
Important
• When an SD memory card is inserted, select "Use".
SD memory card is used.
SD memory card is not used.
When the [E-mail notification] function or the [Panasonic alarm protocol]
function is used to notify the remaining space on the SD memory card,
select a level (%) at which to be notified from the following.
50%/20%/10%/5%/2%
................................................................................................................
Note
• Notification will be performed each time the remaining space of the
SD memory card reaches the values above.
For example, notification will be performed each time the remaining
space reaches 50%, 20%, 10%, 5% and 2% when "50%" is selected.
Depending on the network environment in use, notification may not
always be made at the very moment that the remaining space has
reached each value.
.....................................................................................................................
13
Description
(1/2)