Setting The Alarm Image [Alarm] - Panasonic WV-NW484S Setup Manual

Setting the alarm image [Alarm]

Click the [Alarm] tab on the "Alarm setup" page.
Settings relating to alarm images to be sent to an FTP server can be configured on this page. To transmit
alarm images to an FTP server, it is necessary to configure the FTP server settings in advance. (→ page 51)
(1)
(2)
(3)
(4)
(5)
(6)
No. Item
(1) [To FTP setup]
(2) [Alarm image FTP
transmission]
Default: OFF
ON
OFF
(3) [Directory]
(4) [File name]
(5) [Post alarm]
Transmission
interval
Default: 1 fps
Number of images
Default: 100 pics
Recording duration The approximate time taken to save the "number of images" with the set
(6) [Image capture size]
Default: VGA
When [To FTP setup] is clicked, the [FTP] tab of the "Server setup" page
is displayed. (→ page 51)
Select whether or not to transmit the alarm image to the FTP server when
an alarm is detected.
................................................................................................................
Note
• When using this function, do not set [Alarm input] on the basic setup
page of the [SD memory card] tab under [Save] mode.
.....................................................................................................................
Alarm images are transmitted to an FTP server.
Alarm images are not transmitted to an FTP server.
Enter the name of the directory on the FTP where sent alarm images are
to be saved.
For example, enter "/ALARM" to designate the directory "ALARM" under
the root directory of the FTP server.
Number of characters for the directory name: 1 to 256
Enter the file name used for the alarm image to be saved on the FTP
server. File name: "Entered file name + Time and date (year/month/day/
hour/minute/second) + Serial number".
Number of characters for the file name: 1 to 32
Select the transmission interval, number of images to be transmitted.
Select the interval at which alarm images are transmitted to the FTP
server from the following:
0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
Select the number of images to be transmitted from the following:
1 pic to 9 pics/10 pics/20 pics/30 pics/50 pics/100 pics/200 pics/300 pics/
500 pics/1000 pics/2000 pics/3000 pics/5000 pics
"transmission interval" will be displayed.
Select "QVGA" or "VGA" for the image capture size of the alarm images
to be transmitted to the FTP server or of an image to be attached to the
alarm mail.
36
Description