Panasonic WV-NW484S Setup Manual page 35

No. Item
(3) [Scene change detection
alarm]
Default: OFF
ON(High)
ON(Middle)
ON(Low)
OFF
(4) [Command alarm]
Default: OFF
ON
OFF
(5) [Originating port number]
Default: 8181
Select the detection sensitivity level of the scene change detection alarm.
The scene change alarm detects changes in the subject's state, such as
when the camera is covered with a cloth or cover, or when the camera's
orientation has changed.
................................................................................................................
Note
• Motion cannot be detected by the [Scene change detection alarm]
function in the following situations:
• Only a part of the screen is covered
• The covering is translucent
• The subjects before and after the camera's orientation has
changed resemble each other.
• False detection by the [Scene change detection alarm] function might
occur in the following situations:
• When extreme changes in lighting occur, such as turning the lights
on and off
• When pedestrian or vehicle traffic is heavy
.....................................................................................................................
High-sensitivity scene change alarm operation is performed.
Medium-sensitivity scene change alarm operation is performed.
Low-sensitivity scene change alarm operation is performed.
Scene change alarm operation is not performed.
Select whether or not to receive input from the command alarm.
The "Command alarm" function performs notification of a Panasonic
protocol alarm from other cameras.
Command alarm input is received.
Command alarm input is not received.
Enter the port number to be used to receive the command alarm.
Available port number: 1 to 65535
35
Description
(2/2)