Pin Assignment; 12-Pin Multi-Connector (Dc-In/Sync.); 6-Pin Multi-Connector (Trigger) - JAI CV-M532 Operation Manual

5. Pin Assignment

5.1. 12-pin Multi-connector (DC-IN/SYNC.)

Type: HR10A-10R-12PB (Hirose) male
Seen from rear.
Notes:
*1) Signals on pin no. 6, 7 and 9 can be changed by jumper setting.
See "7.3. Jumper Settings" for more information.
*2) In Edge Pre-select and Pulse Width Control mode do not input ext. VD signal.

5.2. 6-pin Multi-connector (TRIGGER)

Type: HR10A-7R-6PB (Hirose) male
Seen from rear.
CV-M532
EEN output
Ext. Trig input
WEN output
* Notes:
The functions available on the 6-pin multi-connector are not effective in
long time exposure mode.
NC
* Note
GND
NC
* Note
* Note
- 6 -