Names And Functions Of Parts - Mitsubishi Electric MJ-E26VX-A1 Instruction Manual

Names and Functions of Parts

Front
Sensor
Do not cover
Back
20
Handle
Raise handle to transport
Rear Air Intake
Continuous
drainage
outlet
22
Louvre
16
Main Air
Outlet
Control panel
Downward
louvre
16
Tank lid
11 21
•
Tank Guard
Float
21
Water tank
Level window
The water tank may contain water residue at time of purchase. This is from
final product testing at the factory and is not due to a defect.
Washable photocatalytic filter
(hereafter: photocatalytic filter)
Supplied with unit.
Set before use.
Pre-filter
The pre-filter is made from two layers: a blue air filter and a
white particle filter. These layers cannot be separated.
Air filter performance testing facility
Japan Spinners Inspecting Foundation (tested under JIS L 1902
standards)
Storage Hook
Cord Tie
Remove during
operation
Power plug
Wheel (4)
20
11 21
•
11 21
•
10
23
What is a washable photocatalytic filter?
The washable photocatalytic filter has a two-layer construction
consisting of a white particle filter and a blue air-freshener filter.
<Particle filter>
The fine particle filter removes pollen* and dust particles.
<Air-freshener Filter>
The special air-freshening agent contained in the fibres of the
air-freshener filter absorbs odorants such as ammonia. The
odor is broken down by photocatalysis renewing the air-
freshening properties.
As the filter's particle and air-freshening properties are renewed
by simply soaking and leaving it to dry in the sun, the air purifier
can be used continuously over a long time.
Cigarette smoke and toxins found in smoke, such as carbon
monoxide, cannot be removed with this filter.
* Diameter of pollen: approx. 10-100µm
24~25
7