Replacement Parts; Storage And Disposal - Mitsubishi Electric MJ-E26VX-A1 Instruction Manual

Table of Contents

Advertisement

Replacement
Parts
The photocatalytic filter becomes depleted over
time.
Replace them when necessary.
Replacing the photocatalytic filter
Although the photocatalytic filter lasts roughly 2
years, replace it when:
¡ You have soaked the filter 8 times.
¡ The photocatalytic filter has turned brown due
to cigarette smoke or black with dust.
Filter life differs on usage and environmental
conditions.
Remove the pre-filter and replace the
photocatalytic filter.
For maintenance procedures see
Parts sold separately
Photocatalytic filter for replacement
∞ Type: MJPR-18TXFT
∞ Type code: 5C5 816
For these items contact your nearest Mitsubishi
Electric dealer.
Storage and
Disposal
Storage
After switching the unit off, leave for one day until
any water inside has had time to settle. Then carry
out the following steps.
1
Perform drying inside
Performing internal drying to prevent mildew
growth is recommended.
2
Hang on the
cord hook.
10
3
Remove the
drainage
water.
Empty the water tank and
wipe away any remaining
drops of water.
4
Clean the
pre-filter.
Remove grit with
vacuum cleaner
5
Store the unit.
• When you are sure that all parts of the
unit are dry, cover it with a cloth to keep
it from dust.
• Store the unit in an upright position in a
place not exposed to direct sunlight.
When disposing the unit
Dispose according to the garbage regulations in
your district.
¡
Photocatalytic filter
Material: PET and PS
¡ Unit
Do not disassemble. Dispose according to the
garbage regulations in your district.
17
21
23
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents