Table of Contents
Advertisement
Product Features
About This Guide
This guide provides you with information on using and administering your SGI 1200
server. Although there are a number of models in the SGI 1200-family of servers, this
document refers to the products generically as SGI 1200 servers. The following section
describes this product's features.
The SGI 1200 server has one or two processors, and the chassis is built in a 2U form factor.
Some of the server's features include:
•
2U (3.48-inch) height for convenient placement in a 19-inch EIA rack
•
One or two Intel Pentium III processors
•
Ultra2 SCSI controller, S-VGA video, serial, parallel ports and 10/100-BaseT
Ethernet on the motherboard
•
Up to 2 GB of ECC SDRAM
The SGI 1200 has four hard disk bays and an SCA (Single Connector Attachment)
midplane for easy drive removal, replacement and chassis monitoring. The server can
support hot-swap drives with an optional SGI 1200 server RAID controller. Other
features include:
•
Remote Server Management Port
•
400 watt autoranging power supply
The following topics are covered in this manual:
•
Chapter 1, "Site Preparation and Technical Specifications" provides environmental
and technical infomation needed to properly set up and configure the SGI 1200
server system.
xi
Advertisement
Table of Contents
