Zte ZXR10 8900 Series Hardware Manual page 80

ZXR10 8900 Series Hardware Manual
Interfaces
LEDs
72 Confidential and Proprietary Information of ZTE CORPORATION
Optical module used by gigabit Ethernet optical interface is
hot—swap SFP optical module.
transmission distances used by gigabit Ethernet. Characteristics
are shown in Table
T 83 I C
ABLE NTERFACE
Interface Type
1000BASE-SX
(SFP-M500)
1000BASE-LX
(SFP-S10K)
1000BASE-LX
(SFP-S40K)
1000BASE-LH
(SFP-S80K)
1000BASE-LH
(SFP-S120K)
10/100/1000
Base-TX
There are 24 LEDs in front panel of RS-89E3-24GE-SFP4RJ card,
indicating the state of the optical interfaces. Each interface has
one LED. Functions of these LEDs are described in
T 84 LED F
ABLE UNCTIONS OF
LED Type
State Description
On: interface link is created
LINK/ACT Off: interface is disconnected from others
Flash: data transmission and reception in the interface
Each port supports different
83.
RS-89E3-24GE-SFP4RJ C
HARACTERISTICS OF
Characteristics
LC connector, multi-mode optical fiber, with the
wavelength of 850nm, maximum transmission
distance is 500m
Transmission power range: -9.5dBm~-4dBm,
receiving sensitivity: ≥-18dBm
LC connector, single-mode optical fiber, with the
wavelength of 1310nm, maximum transmission
distance is 10km
Transmission power range: -9.5dBm~-3dBm,
receiving sensitivity: ≥-20dBm
LC connector, single-mode optical fiber, with the
wavelength of 1310nm, maximum transmission
distance is 40km
Transmission power range: -4dBm~0dBm,
receiving sensitivity: ≥-22dBm
LC connector, single-mode optical fiber, with the
wavelength of 1550nm, maximum transmission
distance is 80km
Transmission power range: 0dBm~5dBm,
receiving sensitivity: ≥-22dBm
LC connector, single-mode optical fiber, with the
wavelength of 1550nm, maximum transmission
distance is 120km
Transmission power range: 0dBm~5dBm,
receiving sensitivity: ≥-30dBm
Follow IEEE 802.3z standard
RJ45 connector
Using UTP5
The maximal transmission distance is 100m
MDI/MDIX
RS-89E3-24GE-SFP4RJ C
ARD
Table 84.
1
ARD