Zte ZXR10 8900 Series Hardware Manual page 62

ZXR10 8900 Series Hardware Manual
LEDs
54 Confidential and Proprietary Information of ZTE CORPORATION
T 54 I C
ABLE NTERFACE
Interface Type
1000BASE-SX (SFP-M500)
1000BASE-LX (SFP-S10K)
1000BASE-LX (SFP-S40K)
1000BASE-LH (SFP-S80K)
1000BASE-LH (SFP-S120K)
10/100/1000 Base-TX
There are 24 LEDs in front panel of RS-89S2-24GE-SFP4RJ card,
indicating the state of the optical interfaces. Each interface has
one LED. Functions of these LEDs are described in
RS-89S2-24GE-SFP4RJ C
HARACTERISTICS OF
Characteristics
LC connector, multi-mode optical
fiber, with the wavelength of
850nm, maximum transmission
distance is 500m
Transmission power range:
-9.5dBm~-4dBm, receiving
sensitivity: ≥-18dBm
LC connector, single-mode optical
fiber, with the wavelength of
1310nm, maximum transmission
distance is 10km
Transmission power range:
-9.5dBm~-3dBm, receiving
sensitivity: ≥-20dBm
LC connector, single-mode optical
fiber, with the wavelength of
1310nm, maximum transmission
distance is 40km
Transmission power range:
-4dBm~0dBm, receiving
sensitivity: ≥-22dBm
LC connector, single-mode optical
fiber, with the wavelength of
1550nm, maximum transmission
distance is 80km
Transmission power range:
0dBm~5dBm, receiving
sensitivity: ≥-22dBm
LC connector, single-mode optical
fiber, with the wavelength of
1550nm, maximum transmission
distance is 120km
Transmission power range:
0dBm~5dBm, receiving
sensitivity: ≥-30dBm
Follow IEEE 802.3z standard
RJ45 connector
Using UTP5
The maximal transmission
distance is 100m
MDI/MDIX
ARD
Table 55.