Zte ZXR10 8900 Series Hardware Manual page 64

ZXR10 8900 Series Hardware Manual
LEDs
56 Confidential and Proprietary Information of ZTE CORPORATION
T 57 I C
ABLE NTERFACE
Interface Type
1000BASE-SX
(SFP-M500)
1000BASE-LX
(SFP-S10K)
1000BASE-LX
(SFP-S40K)
1000BASE-LH
(SFP-S80K)
1000BASE-LH
(SFP-S120K)
10/100/1000
Base-TX
There are 28 LEDs in front panel of RS-89S2-24GE-RJ4SFP card.
Each electrical interface has one LED. Functions of these LEDs are
described in Table 58.
T 58 LED F
ABLE UNCTIONS OF
LED Type
State Description
On: interface link is created
LINK/ACT Off: interface is disconnected from others
Flash: data transmission and reception in the interface
RS-89S2-24GE-RJ4SFP C
HARACTERISTICS OF
Characteristics
LC connector, multi-mode optical fiber, with the
wavelength of 850nm, maximum transmission
distance is 500m
Transmission power range: -9.5dBm~-4dBm,
receiving sensitivity: ≥-18dBm
LC connector, single-mode optical fiber, with the
wavelength of 1310nm, maximum transmission
distance is 10km
Transmission power range: -9.5dBm~-3dBm,
receiving sensitivity: ≥-20dBm
LC connector, single-mode optical fiber, with the
wavelength of 1310nm, maximum transmission
distance is 40km
Transmission power range: -4dBm~0dBm,
receiving sensitivity: ≥-22dBm
LC connector, single-mode optical fiber, with the
wavelength of 1550nm, maximum transmission
distance is 80km
Transmission power range: 0dBm~5dBm,
receiving sensitivity: ≥-22dBm
LC connector, single-mode optical fiber, with the
wavelength of 1550nm, maximum transmission
distance is 120km
Transmission power range: 0dBm~5dBm,
receiving sensitivity: ≥-30dBm
Follow IEEE 802.3z standard
RJ45 connector
Using UTP5
The maximal transmission distance is 100m
MDI/MDIX
RS-89S2-24GE-RJ4SFP C
ARD
ARD