Table of Contents
Advertisement
Grass Trimmer
250W 230mm
Instruction Manual
2 Year Replacement Warranty
GTR-250
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
0712
www.ozito.com.au
To view the full range visit:
1
Advertisement
Table of Contents
Related Manuals for Ozito GTR-250
Summary of Contents for Ozito GTR-250
- Page 1 Grass Trimmer 250W 230mm Instruction Manual 2 Year Replacement Warranty GTR-250 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
-
Page 2: Specifications
SpecificationS - model no. GtR-250 Motor: 250W Input: 230-240V ~ 50Hz No load speed: 12,000/min Cutting diameter: 230mm Cutting system: Dual action cutting blades Noise level: 96dB Weight: 1.5kg KnoW youR pRoduct Main Handle Blades On/Off Switch Secondary Handle Cord Retainer... -
Page 3: Table Of Contents
taBle of contentS Page 2 SPECIFICATIONS ……………………………………….. Page 4 INTRODUCTION………………………………………… Page 4 ELECTRICAL SAFETY…………….……………………… Page 5 GENERAL POWER TOOL SAFETY WARNINGS……… Page 7 GRASS TRIMMER SAFETY WARNINGS……….…..Page 8 ASSEMBLY......………………………………… Page 9 OPERATION……………………………………………… Page 10 MAINTENANCE…………….…………………………… Page 11 SPARE PARTS …………….……………………………... Page 11 DESCRIPTION OF SYMBOLS …………………………. -
Page 4: Introduction
The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. -
Page 5: General Power Tool Safety Warnings
GeneRal poWeR tool Safety WaRninGS WaRninG! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or seri- ous injury. Save all warnings and instructions for future reference. The term “power tool”... - Page 6 GeneRal poWeR tool Safety WaRninGS d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
-
Page 7: Grass Trimmer Safety Warnings
GRaSS tRimmeR Safety WaRninGS this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 8: Assembly
aSSemBly WaRninG! Before assembly, make sure that the grass trimmer is switched off and unplugged.. fitting the safety guard Turn the trimmer upside down. Place the blade guard (4) over the cutting head on your grass trimmer while aligning both the ridges of the blade guard (4) with the grass trimmer housing (Fig. -
Page 9: Operation
opeRation ( cont trimming WaRninG! Make sure that the work area is free of rocks, debris, lines and other foreign objects. caution: Do not continually tap, bump or hold the spool/blade holder on the ground as this may result in damage to the spool/blade holder, blades or overload the unit. -
Page 10: Maintenance
• Lubrication is not required as the tool has sealed bearings. note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the tool by an unauthorised person or by mishandling of the tool. fitting and replacing blades The trimmer has two removable plastic blades that can be quickly and easily replaced. -
Page 11: Spare Parts
Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. pacK contentS 1 x Grass Trimmer GTR-250 1 x Blade Guard 4 x Cutting Blades (2 fitted) 2 x Phillips Head Screws ( for safety guard) -
Page 12: Warranty
If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations. • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. oZito Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175...
Need help?
Do you have a question about the GTR-250 and is the answer not in the manual?
Questions and answers