Ozito PXCGTAS-018 Instruction Manual

Ozito PXCGTAS-018 Instruction Manual

Cordless grass trimmer

Advertisement

CORDLESS GRASS
TRIMMER
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage:
18V
No Load Speed:
8,500/min
Cutting Diameter:
240mm
Weight:
1.3kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: Spindle plate,
cutting blades.
STANDARD EQUIPMENT
Grass Trimmer
Safety Guard
Flower Guard & Spindle Plate
Adjustable Handle & Blades x 10
PXCGTAS-018
0318

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXCGTAS-018 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito PXCGTAS-018

  • Page 1 1.3kg Flower Guard & Spindle Plate ozito.com.au Adjustable Handle & Blades x 10 PXCGTAS-018 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    UNLESS THE SAFETY GUARD IS PROPERLY FITTED. Fitting the Secondary Handle BATTERY & CHARGER 1. Place the adjustable This tool is compatible with all battery and chargers from the Ozito handle over the bracket so Power X Change Range. it is positioned correctly.
  • Page 3: Adjusting The Trimmer

    2. ADJUSTING THE TRIMMER Fitting the Flower Guard Adjusting the Height 1. Attach the flower guard to 1. Loosen the shaft adjustment the motor housing. collar. 2. Extend to the desired Attaching a Blade height and then retighten the shaft adjustment 1.
  • Page 4: Operation

    RESULTS ARE ACHIEVED ON DRY GRASS.) WARNING! STONES, PIECES OF METAL AND OTHER OBJECTS CAN BE THROWN OUT AT HIGH SPEED BY CAUTION! BYSTANDERS MUST KEEP A MINIMUM SAFE THE BLADE. DISTANCE OF 10M AWAY FROM THE TRIMMER WHILE IT IS OPERATING. PXCGTAS-018...
  • Page 5: Troubleshooting

    Desk at your local Bunnings Warehouse. For further information, or any parts not listed here, Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the grass trimmer by an unauthorised person or by mishandling of the grass visit www.ozito.com.au or contact Ozito Customer...
  • Page 6: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. The power supply for this products charger should be protected by a residual current device (rated at 30mA This tools charger is double insulated therefore no earth wire is required.
  • Page 7: Warranty

    Noise Rating: 94 dB Tool Weight: 1.93kg Front Handle & Fitting Screw ozito.com.au PXHTS-570 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 8 BATTERY & CHARGER This tool is compatible with all battery and chargers from Ozito WARNING! NEVER USE THE HEDGE TRIMMING Power X Change Range. UNLESS THE SAFETY GUARD IS FITTED.
  • Page 9: Front Handle

    OPERATION 2. INSERTING & REMOVING THE BATTERY Front Handle Inserting the Battery Pack 1. Place the front handle in position 1. Align the ribs of the battery on the hedge trimmer. Ensure the with the recess in below handle lock is positioned on the the handle.
  • Page 10: Switching On And Off

    3. CONTROLS 4. OPERATION Rotating Rear Handle WARNING! CLEAR THE AREA TO BE CUT BEFORE EACH USE. REMOVE ALL OBJECTS, SUCH AS CORDS, The hedge trimmer is fitted with a rotatable rear handle. It can be rotated 90° LIGHTS, WIRE, OR STRING WHICH CAN BECOME to the left and right.
  • Page 11 • Store the hedge trimmer indoors, in a dry place that is inaccessible to children. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the trimmer by an unauthorised person or by mishandling of the trimmer. This tool is designed for DIY use - use in commercial or industrial environments will void the warranty.
  • Page 12: Hedge Trimmer Safety Warnings

    A residual current device reduces the risk of electric shock. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
  • Page 13 21. Keep the battery charger, batteries and the cordless tool out of children’s reach. 22. Do not use damaged battery chargers. 23. Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Change PXBP-250 rechargeable batteries with an Ozito Power X Change Charger.
  • Page 14 Australia 1800 069 486 tool) for the battery to reach its optimum performance / runtime. This battery is compatible with chargers from the 18V Ozito Power X Change range New Zealand 0508 069 486 available through your local Bunnings Warehouse. Product availability may differ.
  • Page 15 21. Keep the battery charger, batteries and the cordless tool out of children’s reach. 22. Do not use damaged battery chargers. 23. Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Change rechargeable batteries with an Ozito Power X Change Charger.
  • Page 16 The correct dimensions for drill holes can be found on the back of the charging unit; a on the tool. template for the mounting hole locations can also be found on the Ozito website. • If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.

Table of Contents

Save PDF