2. CORD RETAINER 3. CHECKS PRIOR TO OPERATION Using the Cord Retainer WARNING! ENSURE THE HEDGE TRIMMER IS DISCONNECTED FROM THE POWER SUPPLY BEFORE NOTE: TO AVOID THE EXTENSION CORD FROM DETACHING; PERFORMING ANY OF THE FOLLOWING OPERATIONS. ALWAYS CHECK THAT THE CORD IS ATTACHED TO THE CORD RETAINER BEFORE USE.
Note: The handle has 5 positions, 45° and 90º to the left, 0° in the centre and 45° and 90º to the right. The rotating handle NOTE: DO NOT CUT HEDGES WHEN WET. (THE BEST RESULTS button will lock at any of these positions ARE ACHIEVED WHEN DRY.) HTER-600...
Blades are not Blades could be Contact customer service. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the hedge trimmer by an unauthorised person or by cutting smoothly. worn or damaged mishandling of the hedge trimmer.
Page 6
600W Hedge Trimmer Tool: 600W 550mm Electric Hedge Trimmer SPARE PARTS Model No. HTER-600 Model No. HTER-600 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No.
The electric motor has been designed for 230V and 240V only. Always check that the power supply Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the corresponds to the voltage on the rating plate. extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO 0614 Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
Need help?
Do you have a question about the HTER-600 and is the answer not in the manual?
Questions and answers