Ozito PXLTS-180 Instruction Manual
Ozito PXLTS-180 Instruction Manual

Ozito PXLTS-180 Instruction Manual

Cordless line trimmer

Advertisement

CORDLESS
LINE TRIMMER
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
8,000/min
Cutting Width:
280mm
Cutting Line:
Ø1.6 x 5m
Line Feed:
Automatic
Noise Rating:
96dB
Weight:
2.65kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
OZITO INDUSTRIES PTY. LTD.
WARRANTY
25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example: cutting line.
STANDARD EQUIPMENT
Line Trimmer
Safety Guard & Screws
PXLTS-180
0122

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXLTS-180 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXLTS-180

  • Page 1 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175. 0122...
  • Page 2: Know Your Product

    It is provided with a safety cover. BATTERY & CHARGER Remove the safety cover This tool is compatible with all batteries & chargers from the Ozito Power X Change before starting work. range. WARNING! ALWAYS USE GLOVES WHEN HANDLING ONLINE MANUAL THE BLADE.
  • Page 3 2. ADJUSTMENTS Adjusting the Edging Guide WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE Extend the edging guide to prevent the cutting head from getting too close PERFORMING ANY OF THE FOLLOWING TASKS. to an object such as a tree trunk or wall. There are two locking points, minimum or maximum guide length.
  • Page 4: Operation

    OPERATION 3. INSERTING & REMOVING THE BATTERY 4. CONTROLS Inserting the Battery WARNING! BEFORE YOU START THE UNIT, MAKE SURE THAT THE LINE TRIMMER IS NOT MAKING 1. Align the ribs of the battery CONTACT WITH ANY OBJECTS. with the recess below the handle and push in until it Switching On &...
  • Page 5: Using The Line Trimmer

    WARNING! DO NOT CONTINUALLY TAP, BUMP OR HOLD THE CUTTER HEAD ON THE GROUND AS THIS MAY RESULT IN DAMAGE TO THE SPOOL HOLDER OR OVERLOAD THE UNIT. PXLTS-180...
  • Page 6: Maintenance

    • When not in use, the line trimmer should be stored in a dry, frost free location not within the reach of children. Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the tool by an unauthorised person or by mishandling.
  • Page 7: Troubleshooting

    Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse. For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Service: Australia 1800 069 486 New Zealand 0508 069 486...
  • Page 8: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New at 30mA or less). A residual current device reduces the risk of electric shock.
  • Page 9 21. Keep the battery charger, batteries and the cordless tool out of children’s reach. 22. Do not use damaged battery chargers. 23. Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Change PXBP-250 rechargeable batteries with an Ozito Power X Change Charger.
  • Page 10 Only use the battery pack with Ozito Power X Change 18V cordless products. MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS This battery is compatible with chargers from the 18V Ozito Power X Change range WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO available through your local Bunnings Warehouse.
  • Page 11 21. Keep the battery charger, batteries and the cordless tool out of children’s reach. 22. Do not use damaged battery chargers. 23. Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Change rechargeable batteries with an Ozito Power X Change Charger.
  • Page 12: Charging A Battery

    The correct dimensions for drill holes can be found on the back of the charging unit; a • If the tool shows signs of damage or defects caused by or resulting from template for the mounting hole locations can also be found on the Ozito website. abuse, accidents or alterations.

Table of Contents

Save PDF