Clarke CIR13C Operating & Maintenance Instructions

Clarke CIR13C Operating & Maintenance Instructions

12v dc - 1/2” square drive impact wrench kit
Hide thumbs Also See for CIR13C:

Advertisement

12V DC - 1/2" SQUARE DRIVE
IMPACT WRENCH KIT
MODEL No. CIR13C
Part No. 4500610
OPERATING & MAINTENANCE
INSTRUCTIONS
0299

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CIR13C and is the answer not in the manual?

Questions and answers

Summary of Contents for Clarke CIR13C

  • Page 1 12V DC - 1/2” SQUARE DRIVE IMPACT WRENCH KIT MODEL No. CIR13C Part No. 4500610 OPERATING & MAINTENANCE INSTRUCTIONS 0299...
  • Page 2 Thank you for purchasing this CLARKE 12 volt DC, 1/2” Square Drive Impact Wrench. Please read this leaflet thoroughly and follow the instructions carefully, in doing so you will ensure the safety of yourself and that of others around you, and you can look forward to the tool giving you long and satisfactory service.
  • Page 3 OPERATING INSTRUCTIONS A. LOOSENING A NUT If you are changing a wheel, first jack up the vehicle according to the vehicles handbook, and remove any wheel trim, then proceed as follows: Switch OFF the vehicle ignition and insert the cigarette lighter plug into the socket at the dashboard, or, connect the clamps across the battery and insert the cigarette lighter plug, from the wrench, into the socket provided.

Table of Contents