Related Manuals for Clarke Air CAT 231C
Summary of Contents for Clarke Air CAT 231C
- Page 1 1/2” IMPACT WRENCH SET 1/2” IMPACT WRENCH SET MODEL NO: CAT 231C + CAT 96 PART No: 3110425 & 3110852 OPERATION & MAINTENANCE INSTRUCTIONS 0104...
-
Page 2: Specifications
Vibration Emmisions, Refer to notes on pages 7 and 8 Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International reserve the right to change specifications at any time without prior notice. Always consult the machines data plate... - Page 3 PARTS: Parts@clarkeinternational.com SERVICE: Service@clarkeinternational.com ACCESSORIES A wide range of Airline accessories is available, including Filter/Regulators, Lubricators, High Pressure Hoses from 5 to 100 Metres, etc. Contact your CLARKE dealer for further information, or CLARKE International Sales Department on 01992 565300...
-
Page 4: Safety Precautions
They add weight a ¼” hose adapter,(A whip hose with Quick and could fail due to vibration. Fit coupling is available from your CLARKE ❐ dealer). then connect the other end to the DO NOT over-reach. Keep your proper airline. -
Page 5: Maintenance
. 1. Ensure air is turned OFF, select appropriate impact socket, which 3. Pour a few drops of CLARKE Air Line must be in good condition, and fits the Oil (approx 3cc), into the air inlet. This tool shank and nut closely. -
Page 6: Parts Diagram
PARTS DIAGRAM PARTS LIST Index Part Description Index Part Description 504W27 Front End Plate 504W01 Housing CA6001 Ball Bearing 504W02 Valve Bushing 504W29 Rear End Plate 504W03 Reverse Valve 504W30 504W04 Trigger 504W31 Spring 504W05 504W32 504W06 Valve Stem 504W33 gasket 504W07 Air Inlet... -
Page 7: Hand-Arm Vibration
HAND-ARM VIBRATION Employers are advised to refer to the HSE publication “Guide for Employers”. All hand held power tools vibrate to some extent, and this vibration is transmitted to the operator via the handle, or hand used to steady the tool. Vibration from about 2 to 1500 herz is potentially damaging and is most hazardous in the range from about 5 to 20 herz. - Page 8 You will note that a third value is given in the specification - the highest measured reading in a single plane. This is the maximum level of vibration measured during testing in one of the axes, and this should also be taken into account when making a risk assessment.
Need help?
Do you have a question about the Air CAT 231C and is the answer not in the manual?
Questions and answers