Displaying The Lap Overview - Beurer PM 26 Operating Instructions Manual

Note: The calorie and fat burn values are determined based
on your heart rate during training.
When LIGHT is activated again, the display jumps from the last re-
sult display (Time) back to the first result display (Maximum heart
rate and average heart rate).
Note: If you exit the training mode from any of the above-
mentioned displays using the MODE button and later return to
the training mode (also using MODE) from another mode, the
last selected display will appear.

Displaying the lap overview

Press the MODE button until you are in the lap overview main
menu. The lap results from the current training session are dis-
played. In the upper line, the lap times are displayed in the
hours/minutes/seconds format. In the lower line, the average heart
rate of the lap is displayed.
By pressing ST/STP/RESET or LIGHT, you can switch between
individual laps.
17
G
B