Pioneer DVR-65H-S Training Manual page 74

<<diagnostic method>>
5) Perform HDD Read/Write Check.
Please be sure to obtain consent from a customer about elimination of HDD data before
performing this test.
If [4] is pressed and [SKIP >>|] is pressed from a menu screen, HDD Read/Write Check will
begin. And, it can be interrupted even if it is under test, when [SKIP |<<] is pressed.
HDD R/W CHECK
Caution! This test overwrites all sectors.
Write Error
Read Error
Compare Error :
Current LBA
Max LBA
Progress
Remain Time
HDD R/W CHECK
Caution! This test overwrites all sectors.
Write Error
Read Error
Compare Error :
Current LBA
Max LBA
Progress
Remain Time
[Judgment criteria]
In all the items of Write/Read/Compare;
- With NO Error
HDD is normal, it is not necessary to replace the tested HDD. It is the fault by the
block except HDD.
- With Error
HDD should be replaced.
After checking, press [Clear] to return to a menu screen then press [ESC] to escape from the
diagnostic tool.
OFF | ON
: 0
: 0
0
: 0
: 160086528
: 0 %
: -----h --m --s
OFF | ON
: 0
: 0
0
: 17940484
: 160086528
: 11 %
: 5h 59m 11s
The situation of a test is shown as the left screen.
The progress of a test is displayed by % and if it
results to 100%, the test is completed.
[Information on the screen]
[Information on the screen]
- Write Error: The number of write errors
- Write Error: The number of write errors
- Read Error: The number of reading errors
- Read Error: The number of reading errors
- Compare Error: The number of compare errors
- Compare Error: The number of compare errors
- Current LBA: The address under test
- Current LBA: The address under test
- Max LBA:
- Max LBA:
- Progress:
- Progress:
- Remain Time : Estimate Remain time for test done
- Remain Time : Estimate Remain time for test done
Standard
Standard
The total address of HDD
The total address of HDD
Test progress situation [%]
Test progress situation [%]
7 hours per 80GB
7 hours per 80GB
74