Pioneer DVR-65H-S Training Manual page 41

Press the ESC, DISP, then "3" keys, in that order.
(DV/1394) Init:OK AV:01 DV:01
1
[Recoder] GUID:00E036000160001 IRM
2
iPCR:C03F0000 oPCR:0000007A
3
[DV]
4
VN:VICTOR
5
TM:C3 TS:75 CT:32 WP:01 PS:FF OS:00
6
CA:A000002020
7
[DVdecoder:Yes]
8
TC:00h20m35s02f RD:02/02/05 RT:10h34m50s
9
ASPECT:4:3
10
SF:32kHz QU:12bit AMODE:4) Stereo
11
[DVencode:No]
12
13 TC:--h--m--s--f RD:--/--/--/-- RT:--h--m--s
ASPECT:-------- CGMS:-- APSTB:--
14
No. Item
Whether the initialization of uPD72893B
Init (1394LINK & DVcodec IC) has been completed
(OK) or not (NG)
AV Number of AV devices on the local bus
1
DV Number of DV devices on the local bus
Number of executing INT4(PIO) interrupt
INT4 processing routines until a POWER ON
notification arrives from uPD72893B (normally, 02)
2
GUID GUID set in ConfigROM of the unit
iPCR iPCR value of the unit
3
oPCR oPCR value of the unit
GUID set in ConfigROM of the connected DV
4
GUID
device
Vendor name set in ConfigROM of the connected
VN
DV device
5
Model name set in ConfigROM of the connected
MN
DV device
TM Transport Mode data obtained from the DV device
TS Transport State data obtained from the DV device
CT Cassette Type data obtained from the DV device
6
WP Copy-protection data obtained from the DV device
PS Power-state data obtained from the DV device
Output signal mode data obtained from the DV
OS
device
Connect AV data obtained from the DV device
CA
7
Camera/VTR data obtained from the DV device
CV
DV device mode
MD
Whether Yes (in the process of requesting DV
8
[DVdecode:XXX]
input) or No is indicated in XXX
GUID:0080880303480E96
MN:GR-D50K
CV:FF MD:VTR
CGMS:000000 APSTB:00 DEC:525-60
Description
INT4:02
Boldface alphanumerics
Nonboldface alphanumerics : Variable indications
In a case of NG, communication with uPD72893B may have
failed.
If the number does not become 01 even if a DV device is
connected, identification of that device fails.
In a case of ROOT (IRM), IRM is displayed at the rightmost of
the GUID indication
Data are displayed only if one DV device is identified. If the
connected DV device is ROOT (IRM), IRM is displayed at the
rightmost of the GUID indication
Data are displayed only if one DV device is identified.
(Depending on the device, the vendor name may not be set in
ConfigROM.)
Data are displayed only if one DV device is identified.
(Depending on the device, the vendor name may not be set in
ConfigROM.)
Data are displayed only if one DV device is identified.
Data are displayed only if one DV device is identified.
Camera or VTR is displayed only if one DV device is identified.
Normally, Yes is indicated only when CH is set to DV
41
: Fixed indications
Remarks