Pioneer DVR-65H-S Training Manual page 48

• Screen display when Specific Channel settings are made on 12 (maximum) channels: In such a case. If a channel which does not have
specific settings is selected, the individual setting state for that channel is not displayed, as shown in the figure below, and the settings
cannot be modified. In such a case, if you wish to make Specific Channel Settings for the currently selected channel, you must clear the
Specific Channel Settings for one or more channels beforehand.
[With 12 channels having specific settings,
when the currently selected channel does not have specific settings]
AVIO Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON
Threshold : Normal
V-Sync Det : Normal
Std Det : Normal
HD Err Det : Normal
Individual setting state
Sorry !
You can store only 12 channels
for Specific Area mode.
2. General Setting mode
This mode can be entered only during recording/playback stop. In this mode, each item and its current settings are displayed on the OSD.
The currently selected input mode (TUNER or LINE) is displayed. If L1, L2, L3 or DV is selected for input, general settings for the line
input can be made, and if TUNER is selected, general settings for the tuner input can be made.
[General Setting mode]
AVIO Specific Area Mode
Input - [ tuner ]
Sync AGC : ON
Threshold : Normal
V-Sync Det : Normal
Std Det : Normal
HD Err Det : Normal
*
*
*
*
*
(∗2)
∗
*
*
*
∗
∗ : setting is the default.
48