Pioneer DVR-65H-S Training Manual page 51

Table 2: Aging for the HDD
Press the HDD key to switch to HDD. Press the ESC key then
To enter
the REP.B key on the remote control unit for servicing to enter
Aging mode
Aging mode.
Press the ESC key on the remote control unit for servicing to
quit Aging mode and return to Normal mode. This also results
in the following:
To quit
• If during recording: Recording is stopped.
Aging mode
• If during playback: Playback is paused.
• If during erasure of all memory data from the HDD, the unit
stops after all memory data have been erased.
During Aging mode, the following operations are repeated in
the order shown below.
1 Erasure of all the memory data from the HDD
2 Recording for 60 minutes
3 Playback for 60 minutes
During Aging, the number of loops is indicated on the FL
Function
display, as shown below.
[AGING 0001]
If an error is generated, the aging operation stops.
Note:
Indications on the FL display are retained, and this
information is also retained as an OSD.
DVR-65H-S & DVR-520H-S
Aging for the HDD
51